505271

Ghibli SB133 Manual

31
Zoom out
Zoom in
Previous page
1/116
Next page
EN
EN - 7
6.1.c - Using the machine
(Figs. 21 and 23)
- After starting the machine, begin cleaning
by keeping the levers (52) pressed, thus
keeping the machine running and brush
rotation active.
- The machine must be used creating small
arches with the operator in the middle.
- The traverse, which is the natural drift of
the machine, is obtained by pressing or
lifting the machine grip.
Pulling or lifting the grip slightly makes
the machine move to the right.
Pressing or gently lowering the grip makes
the machine move to the left.
Slightly twisting the right-hand side of the
grip makes the machine move forward.
Slightly twisting the left-hand side of the
grip makes the machine move backward.
N.B.:
Move the grip gently in order to achieve man-
ageable machine movements.
- To keep the machine running at a certain
point, simply hold the grip in the starting
position.
N.B.:
Using the machine in a xed position while the
brushes are rotating for a prolonged time can
cause damage to the oor.
- For machines equipped with an optional
tank, adjust the water supply using the le-
ver (64).
N.B.:
When the levers (52) are released, brush rota-
tion stops and the machine is turned off.
6.1.d - Double speed (if present)
(Fig. 24)
- For some models, it is possible to select
the brush or pad holder rotation speed:
-
Standard speed
-
Double speed
N.B.:
Select the desired speed before starting the
machine.
WARNING:
Before using the double speed, make sure
that the brush or pad used is capable of a
rotation speed equal to 308 rpm.
-
To select the desired speed, press the
speed selector (65) on the back of the
machine body.
-
Using the machine with double speed se-
lected is identical to using the machine at
a low speed.
It is though, necessary to pay more atten-
tion to the driving movements which must
be even more gentle due to the higher
speed of the machine.
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ghibli SB133 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ghibli SB133 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 4,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info