505271

Ghibli SB133 Manual

29
Zoom out
Zoom in
Previous page
1/116
Next page
EN
EN - 5
2.1.g - Assembling the suction unit
(optional) (Figs. 15/19)
The suction unit consists of the vacuum
cleaner (38), the suction ring (39) with tube
bundle assembled and the vacuum cleaner
support drum (40) (Fig. 15).
- Make sure that the lower support (41)
rests on the plate located on the handle
rod (Fig. 16).
- Loosen the two screws and the knob on
the upper support of the handle, depend-
ing on the machine model.
- Place the drum (42) in its slot on the sup-
port (41).
- Lower the upper support (43) to fit the
drum (42), then tighten the two screws or
the knob of the upper support to lock eve-
rything.
- Tilt the machine and place on onto the
grip.
- Rest the suction ring (45) support plate
(44) on the machine body (Fig. 17) then
put the machine back in the working posi-
tion.
- Insert the vacuum cleaner (46) in the
drum (47) (Fig. 18).
- Connect the tube bundle (48) to the vac-
uum cleaner (46) using a bayonet cou-
pling.
Connect the plug (49) to the auxiliary socket
(50) positioned on the handle or in the ma-
chine unit, depending on the model (Fig.
19).
2.1.h - Assembling additional weight
(optional) (Fig. 20)
If the surface to be cleaned is very dirty, an
additional weight can be assembled on the
machine to enable greater contact pressure
of the brush, or the pad holder, on the floor.
N.B.:
Due of the increased contact pressure, wear
to the brush or pad also increases.
WARNING:
The additional weight is provided with
special recesses (50a) for lifting.
- Lift the additional weight using the special
recesses (50a).
- Place the weight on the appliance.
2.1.i - Electrical connection
- Connect the machine power cable to a
mains socket with characteristics cor-
responding to those shown on the ma-
chine’s technical data plate.
WARNING:
- Make sure the mains electrical system
has a circuit breaker and is earthed.
- Unwind the power cable completely be-
fore operating the appliance.
- Use an extension cord only if in perfect
condition and make sure the cross sec-
tion is appropriate for the power of the
appliance.
- Never allow the power cable to slide
over sharp edges and do not crush it.
-
The socket should be easily accessible.
- Make sure the power cable is not dam-
aged.
3.1 KNOWLEDGE OF THE
MACHINE (Fig. 21)
51) Guide handle
51a) Electric control box
52) Brush rotation start levers (on-off)
53) Water supply adjustment lever
54) Handle tilt lever
55) Power cable
56) Brush rotation lever release button
57) Machine body
58) Wheels
59) Supports
60) Electrical connection
61) Auxiliary socket (if any)
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ghibli SB133 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ghibli SB133 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 4,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info