522267
15
Zoom out
Zoom in
Previous page
1/29
Next page
offered by Busse-Yachtshop.com
26
27
EnglishEnglish
GETTING STARTED
We recommend that you use the GEONAV intuitively, since
no damage will be caused by pressing an incorrect button.
Make sure that the unit is powered,
insert a CompactFlash™ cartridge and
then press PWR. At start-up, the last
chart used will be loaded by default. If
the chart is not found, the list of
NAVIONICS charts stored into the
CompactFlash™ cartridge will be dis-
played. Select the desired chart by the
CURSOR key, then confirm by pressing
ENTER.
A message will warn the user that electronic nautical charts
do not replace official government charts.
Press the PWR key to turn the display backlight on and adjust
brightness by the CURSOR key; press PAGE to continue.
The Satellite window will show the configuration of the sat-
ellites in use.
As soon as the GPS receiver has obtained a valid fix (it can
take a few minutes), the boat’s position and the relevant area
will be displayed at the best scale available.
The default language is English. To change the language, press
PAGE to display the menu, then select SETUP, LANGUAGE
and the desired language by the CURSOR key.
The line, or vector, starting from the boat indicates the boat’s
direction, to be ignored if the boat is stationary.
The window situated in the lower part of the screen will
display the boat’s speed, route and chart scale.
The GEONAV is in Navigation mode; by pressing the CURSOR
Getting Started
20m: areas with depths up to 10 meters in dark blue, up to
20 meters in blue
The areas whose depths are over the limit set, and therefore
navigable under safety conditions, will be displayed in white.
Dryline areas are always displayed in green.
NOTE: The mentioned colors are those used in the DAY mode. In NIGHT mode, the
areas with depths over the limit set, and therefore navigable under safety conditions,
are in black, whereas the colors below the limit are dark blue for higher depths and
blue for lower depths (e.g., 5m: areas with depths up to 2m displayed in blue, up to
5m in dark blue).
Chart loading
At start-up, the list of the NAVIONICS electronic charts stored
in the cartridge is shown, provided that a CompactFlash™
cartridge has been inserted.
Select the chart desired by CURSOR, then confirm by ENTER.
Each time the unit is switched on, the latest chart used will
be loaded.
To load another chart stored in the CompactFlash™. press
PAGE to display the menu, select SETUP and then SELECT
CHART.
Contrast/Brightness
Press the PWR key to display the CONTRAST/LIGHT win-
dow. To switch from one option to the other and to adjust the
contrast/brightness level, press CURSOR. Press the PAGE key
to exit.
The contrast can be adjusted at start-up, when the WARNING
message appears or when the satellite window is displayed;
press the ZOOM key and adjust the contrast.
Functional Characteristics
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geonav 6 SUNSHINE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geonav 6 SUNSHINE in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info