522267
14
Zoom out
Zoom in
Previous page
1/29
Next page
offered by Busse-Yachtshop.com
24
25
EnglishEnglish
Functional Characteristics
To cancel local time, press PAGE until the menu bar is dis-
played, select SETUP, SET TIME and then GMT.
Chart presentation
This function allows the user to select the symbols and colors
of chart presentation between International mode and US mode.
To change the chart presentation mode, press PAGE to display
the menu, select SETUP, PRESENTATION and then choose
the option desired.
Display mode
The chart color can be selected among three predefined modes:
BRIGHT (bright light), DAY (normal light) and NIGHT (poor
light).
Press PAGE to display the menu, select SETUP, MODE and
then choose the option desired.
Depth contours
This function allows the user to select the display of depth
contours; the options available are:
OFF: no depth contour displayed
5m: display of contours only with depths up to 5 meters
10m: display of contours only with depths up to 10 meters
20m: display of contours only with depths up to 20 meters
ALL: all depth contours are displayed
Safety contours
This function allows the user to display the depth areas cor-
responding to the safety contour desired. The options avail-
able are:
OFF: no depth area displayed
2m: areas with depths up to 2 meters in dark blue
5m: areas with depths up to 2 meters in dark blue, up to 5
meters in blue
10m: areas with depths up to 5 meters in dark blue, up to
10 meters in blue
replacing RANGE with OVZ (blinking) within the navigation
window.
To activate/deactivate the Overzoom function, press PAGE un-
til the menu bar is displayed, then select SETUP, OVERZOOM
and ON/OFF.
Position calibration
Most position sensors have intrinsic errors that make the boat’s
position incorrect (from few meters to several hundred meters)
with respect to the background display of the chart.
This error is caused by the principle at the root of the satel-
lite-derived position system.
The position calibration allows the user to manually correct
the position error present in all GPS. Press PAGE until the
menu bar is displayed, select SETUP, CALIBRATION and then
ON.
A message will prompt the user to move the cursor to the boat’s
true position by using the CURSOR key. Press ENTER to move
the GPS boat’s position to the point indicated by the cursor.
This operation will save the calibration for use in future cal-
culations.
NOTE: When the calibration is activated, the coordinates will be marked by (*).
To cancel calibration, press PAGE until the menu bar is dis-
played, select SETUP, CALIBRATION and then OFF.
Local time
By this function the user can enter local time instead of the
Greenwich time (GMT) supplied by the GPS receiver.
To enter local time, press PAGE until the menu bar is dis-
played, select SETUP, SET TIME and then LOCAL.
A window will allow entering local time by using the CURSOR
key. Press ENTER to confirm the operation.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geonav 6 SUNSHINE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geonav 6 SUNSHINE in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info