743584
10
Zoom out
Zoom in
Previous page
1/36
Next page
warm up
on
target
off
The warm-up phase is automatically selected. The cursor is positioned on the icon representing the warm-up phase.
Press OK to modify or press ▼ to select the number of series.
target
off
ok
warm up
on
The cursor is positioned on the On key. If you want to cancel the warm-up, press the OK key and select off.
target
off
warm up
ok
on
The warm-up is automatically set for 20’00. To change the warm-up time, select the value 20’00 and press OK.
distance
no limit
time
limit
warm up
You can then adjust the warm-up time by modifying either distance or time. In both instances, an alert will notify you at the end of the
anticipated warm-up time. But you can also increase or decrease this time. If you choose an unlimited warm-up, there will be no alert at
the end of the warm-up period.
warm up
limit
In this example, we chose to base our warm-up on distance by selecting distance on the previous screen. Choose one of the values from
the proposed list or specify the value yourself by choosing user and by changing the value using the ▲ and ▼ keys.
warm up
Target
off
ok
on
Once you have chosen warm-up time or distance using the and keys and then conrmed with OK, a summary of your warm-up
programme will appear on your screen. You can adjust the intensity of the programme by selecting the target zone which is automatically
switched to off.
zones
heart rate
warm up
speed
off
You can base your target zone on speed (in km/h or minutes/km) or, in the case of the ONmove 710 watch, on heart rate (beats per minute
or as a percentage of maximum heart rate). Select off if you do not wish to use the target zone.
warm up
zones
In this example, the target zone is based on speed in km/h. Select km/h to amend values of target zone.
warm up
zones
zone
Select the lower limit and change the value using the ▲ and ▼ keys and then press OK to amend the upper limit in the same way. Press
OK to conrm the target zone.
warm up
ok
on
Select OK using the ▼ key to conrm your warm-up programme.
warm up
on
The cursor will again move to the icon representing the warm-up phase.
ok
series
Using the ▼ key, select the icon, representing series and press OK to amend the content.
The cursor will move to the action phase . Press OK to amend or ▼ to change the recovery phase .
target
off
action
As with the warm-up phase, you can also amend the distance or time of the action phase and set a target zone.
target
off
action
In our example, a distance of 1km has been chosen for the action phase and the target phase has not been activated.
Once you have specied the settings for the action sequence, press the key then the key to move the cursor to the recovery
phase .
Press OK to amend the recovery phase in the same way as the action or warm-up phase.
10
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geonaute ONmove 710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geonaute ONmove 710 in the language / languages: English as an attachment in your email.

The manual is 14,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Geonaute ONmove 710

Geonaute ONmove 710 User Manual - German - 36 pages

Geonaute ONmove 710 User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info