743591
8
Zoom out
Zoom in
Previous page
1/53
Next page
IMPORTANT:
- Avoid positioning the sensors in overly hairy areas.
- In cold, dry climates, the strap takes several minutes to function correctly because the sensors require a film of sweat to make contact with the skin.
- When measurements start, the watch may indicate very high values for around 20 seconds. This is caused by the algorithm starting up. The display will
stabilise at the correct values after this period of time.
- Be careful when inserting the clip of the elastic strap into its hole in the strap. Hold the pin while passing your finger behind the strap.
BATTERY
If the heartrate indications become incoherent or the heart symbol is not displayed on the screen when the watch is positioned in the cradle, you may need to
change the chest strap battery. You can change the strap battery yourself without the need for specialist tools.
Battery replacement procedure:
- Unscrew the battery compartment cover using a coin and then remove it
- Remove the old battery by tapping the opposite side of the strap.
- Replace the used battery with a 3V CR2032 lithium battery without touching the two terminals (the battery may charge down), with the + terminal (printed
surface) towards the top.
- Carefully replace the cover, ensuring that the waterproof seal is correctly positioned, then turn it a quarter of a turn to the "CLOSE" position. If you have any
problems, contact your retailer.
1.2.3. Configuring your Keymaze
Before you use your device, you are advised to adjust the settings according to your preferences.
a) Setting the time zone to display the time
So that the Keymaze automatically sets the right time, it needs to correctly detect satellite signals. The device is currently set to GMT (Greenwich Meridian Time).
You may need to change the reference meridian. To do this, proceed as follows:
1. Press the MODE button several times until you reach the MAIN MENU.
2. Using the 5 and 6 buttons, choose the SETTINGS option and confirm using OK.
3. Using the 5 and 6 buttons, choose the SYSTEM SETTINGS option and confirm using OK.
4. Using the 5 and 6 buttons, choose the SETUP TIME option and confirm using OK.
5. In the TIME ZONE field, press the OK button. Select the appropriate city (reference time zone) from the scrolling menu using the 5 and 6 buttons and
confirm with OK.
6. To activate or deactivate summer time, go to the DAYLIGHT SAVING field using the 5 and 6 buttons and press OK. Select YES or NO using
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geonaute Keymaze 700 Trail at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geonaute Keymaze 700 Trail in the language / languages: English as an attachment in your email.

The manual is 5,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Geonaute Keymaze 700 Trail

Geonaute Keymaze 700 Trail User Manual - German - 25 pages

Geonaute Keymaze 700 Trail User Manual - Dutch - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info