The chest strap serves as a sensor and transmitter. It measures the differences in potential created by your heartbeat at the surface of your skin. It then transmits
this information to the watch by radio signal. The quality and accuracy of its measurements and comfort during use depend on it being correctly positioned. The
sensors (A) are the black rubber surfaces on both sides of the central section.
Fitting procedure:
- Moisten the sensors with water, saliva or a conductive aqueous gel to ensure that contact is good.
- Insert one of the ends of the elastic into one of the holes (B) designed for this purpose.
- Fit the strap around your chest then position the strap just below your pectoral muscles. One of the sensors should be under your heart and the other under
your right pec.
- Adjust the length of the strap so that it fits firmly but comfortably. The strap should not move if you jump or move your arms.
- Check that is positioned correctly by moving the watch to within 50cm.
The heart symbol should be displayed. If it does not appear:
- Move the watch closer to the strap.
- Adjust the position of the strap and fully moisten the sensors.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Geonaute Keymaze 700 Trail at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Geonaute Keymaze 700 Trail in the language / languages: English as an attachment in your email.
The manual is 5,26 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
