503389

General Music CD30 Manual

28
Zoom out
Zoom in
Previous page
1/36
Next page
26
Bend Pitch Bend
Man Manual Controls (= Style control
using Program Change on the
Common Channel).
G.Mus Generalmusic Controls (= Style
and tempo controls using Program
Change on the Common Chan-
nel).
Use the [PAGE<] and [PAGE>] keys to move from one page
to the next.
4. Use [TEMPO-DATA] to turn the selected filter ON or OFF.
ON means the message cannot be communicated while
OFF allows it through.
5. Press both [ESC] keys together to exit from the MIDI mode.
These settings will remain in memory even when the in-
strument has been switched off.
MIDI Dump
The programmable Songs and Styles contained in the memory
can be sent in the form of System Exclusive data to an exter-
nal sequencer (or Computer), a Midi Data Filer, or another
CD instrument, transmitted using DUMP-SAVE.
Furthermore, by means of the DUMP-LOAD function, CD20/
30 can also receive programmable Songs and Styles from
an external device.
To send data:
1. Press [MIDI] to enter the MIDI programming mode.
2. Use the [Page>] button to pass to the “MIDI: Dump” sec-
tion. Select the “Save” function with the [Page] button.
Press [MIDI] to gain access to the function.
3. The display will show a request to insert the name of the
“file” to be sent to the external sequencer:
4. Use the alphanumeric keypad to insert the characters
(each button of the keypad provides three characters which
are selected by pressing the button repeatedly until the
required character appears).
Press [PAGE>] to advance one space. Press [PAGE<] to
move back one space. The name can be up to seven char-
acters long.
5. Confirm the name using [MIDI] or cancel the Dump re-
quest with [ESC]. The display will show “SURE?”.
6. Start recording on the sequencer connected to the CD20/
30.
7. Press [MIDI] to start the data transfer to the external
sequencer. The CD20/30 display will show the “Wait
please” message.
8. On completion, stop the recording on the external
sequencer and save the data to floppy disk.
To receive data:
This operation erases any Songs and Styles which are in
the CD20/30 memory!
The CD20/30 can receive compatible System Exclusive data
from another CD (CD2, CD3, CD10, CD20. CD30 models) or
from an external sequencer using Midi Dump. When these
devices start a Midi Dump, the CD20/30 automatically renders
itself receptive no matter what mode it may be in at the time.
The procedure may also be effected manually however, as
follows:
1. Press [MIDI] to enter the MIDI programming mode.
2. Use the [Page>] key to reach the “MIDI: Dump” section.
The “Load” function is selected. Press [MIDI] to call up
the function.
3. Press [MIDI] to put the CD20/30 in the ready mode. The
CD20/30 display shows the message “Wait Data”. The
[ESC] keys cancel this operation.
4. Press “play” on the external sequencer. The data is trans-
ferred to the CD20/30 memory.
5. On completion, the data has been transferred to CD20/30
memory. Songs and Styles which were previously in the
memory have now been erased.
Dynamics
It is possible to enable/disable the keyboard dynamic func-
tion as well as reception and transmission via Midi of Velocity
messages.
1. Press [MIDI] to enter the MIDI programming mode.
2. Use the [Page>] key to reach the “MIDI: Dymanic Kb” sec-
tion.
3. Use [TEMPO-DATA] to set the dynamic function to OFF
(or ON again).
4. Press both [ESC] keys together to exit from the MIDI mode.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General Music CD30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General Music CD30 in the language / languages: English as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info