503389
26
Zoom out
Zoom in
Previous page
1/36
Next page
24
How to change the Style
1. Using the Common Channel, send the CD20/30 a Pro-
gram Change message with the number which corre-
sponds to the Style required. For example, to select Style
“07/Fusion 1”, send Program Change number 7.
2. The Style is now set. The Sounds of the instrument parts
used for the accompaniment change automatically. If the
[AUTOSET] led is on then the Upper and Lower part
Sounds and the tempo will change too.
How to control the Style
To emulate the Style controls, use the Common Channel to
send the CD20/30 a Program Change message or, alterna-
tively, Control Change messages, as listed in the tables be-
low.
At the same time, these messages are sent from the CD20/
30 to
another instrument (or computer) when the corresponding
keys are pressed.
N.B. Set the input filter on the Manual Controls to OFF in the
MIDI programming mode.
Style Control Program Change
Intro 121
Fill Basic 122
Fill Variation 123
Sync Start 124
Variation On 125
Variation Off 126
End 127
The Control Change messages are always followed by the
assigned value.
Style Control Control Change Value
Intro 112-17
Fill Basic 112-18
End 112-19
Sync Start 112-20
Fill Var 112-37
Variation On 112-102
Variation Off 112-38
Harmony On 112-103
Harmony Off 112-39
Memory On 112-104
Memory Off 112-40
Eff1 On 112-105
Eff1 Off 112-41
Eff2 On 112-106
Eff2 Off 112-42
Arrange On 112-107
Arrange Off 112-43
Freestyle On 112-108
Freestyle Off 112-44
Autoset On 112-109
Autoset Off 112-45
Tempo Increment 118-tempo var, divided by 2
Tempo Decrement 119-tempo var, divided by 2
To synchronize the tempo of the CD20/30 to the master, the
MIDI CLOCK must be set to EXTERNAL (see the “Midi-Midi
Clock special functions” paragraph further on).
When the CD20/30 is controlling another instrument
How to change the Sound
When a Sound is chosen on the CD20/30, the corresponding
Program Change number is sent to the slave instrument, on
the same instrument part as the CD20/30. In the same way,
when the Style is changed, the parts’ Program Changes are
also sent to the slave.
Where a Sound from the second bank is chosen, the CD20/
30 sends - immediately before the Program Change - the
Control Change 0 message with a value 01.
How to change the Style
The styles of the slave instrument must be similar to those of
the CD20/30. If this is not the case, ignore the CD20/30 Style
name but make a note of its number.
The slave instrument must be capable of receiving Style
change messages on a Midi channel. If this is possible then
the Common Channel should be set to that particular chan-
nel, because the CD20/30 sends Style change information
on this special part.
How to control the Style
The slave instrument must be capable of receiving the same
control messages used by the CD20/30 (see the “Style Con-
trol” table in the previous paragraph).
If this is not the case, only Start/Stop is a standard Midi mes-
sage, and so the slave will only be able to receive this mes-
sage.
To synchronize the tempo of the slave to the CD20/30, the
MIDI CLOCK must be set to INTERNAL (see the “Midi-Midi
Clock special functions” paragraph further on). The slave must
have its Midi Clock set to EXTERNAL.
Special MIDI functions
EXT.
SEQ.
CD20
CD30
Midi Thru
Keyb.
Sounds
(LOCAL OFF)
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General Music CD30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General Music CD30 in the language / languages: English as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info