646544

General Electric DDE8500R Manual

7
Zoom out
Zoom in
Previous page
1/16
Next page
End-of-Cycle
Signal
(on some models).
The signal
operates with any cycle.
Variable Signal
The
signal
should
always be used when drying
The control can be set anywhere
between OFF and LOUD, depending
MED
polyester knits or permanent press items which should
OFF+<
\.LOUD
on the desired sound level. The signal
will sound just before the end of the
cycle to remind you to remove the clothes.
@
be removed as soon as the dryer stops to help prevent
setting of wrinkles.
The signal should also be used with the
Extra Care Cycle.
To stop the signal while sounding, turn the signal
control to OFF or advance the Cycle Selector to OFF.
Polyester Knits & Permanent Press Drying Tips
● DO NOT OVERLOAD— ● REMOVE CLOTHES
● PLACE ON HANGERS—
Garments being dried or
PROMPTLY—To help prevent
Permanent press and polyester
dewrinkled should tumble freely.
wrinkling, remove clothes from knit garments look best if placed
the dryer promptly at the end of
on hangers after drying.
the drying cycles.
The Difference Between Automatic and Timed Drying
Automatic Drying (Electronic) Automatic Drying
Timed Drying
(on some models)
When using the Automatic Cycles,
When using the Timed Cycles, you
When using the Automatic Cycles,
the
Automatic
Dr}l
Control system
select the number of minutes you
the
Ele~’tronie
Sensor
Confrol
continually senses the temperature wish the dryer to run and it turns
system
continually senses the
of the air in the dryer drum. Wet off at the end of this time period.
moisture in the tumbling clothes,
laundry keeps this air cool. When
determines when they are dried to
laundry is dry enough (and the
your pre-selected setting, and
drum air warm enough) the heat
terminates the cycle automatically.
turns off. When the air cools, the
Refer to the Controls Setting Guide
heat turns back on. This off and on
for recommended settings. The
cycling may happen
a
number of
Cycle Selector will not advance
times (depending on the fabric, load
until clothes have reached a certain
size and Cycle Selector setting).
degree of dryness.
The Cycle Selector advances (when
the heat is
ofQ
until it automatically
turns off the dryer.
Drying Selections Guide for the Automatic Cycles
Set to NORMAL Position
● For most normal loads.
Set toward More Dry
Set toward Less Dry
A“fm.rlc
A“fomallc
● For loads that include heavy-
● For
light
weight fabric loads.
weight fabrics.
● If you desire to remove less
● If you desire to remove
moisture.
more moisture.
● For very small loads.
7
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General Electric DDE8500R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General Electric DDE8500R in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info