646544
6
Zoom out
Zoom in
Previous page
1/16
Next page
HOW TO
OPEMTE
YOUR DRYER
WARNING—To reduce the risk of fire, electric shock, or injury to
persons when using your appliance, read the IMPORTANT SAFETY
INSTRUCTIONS before operating this appliance.
COTONS
HIGH HEAT
PERM. PRESS
MEDIUM HEAT
KNtTSIDELICATES
LOW HEAT
FLUFF
NO HEAT
Aummatic
Note: End-of-Cycle
Signal
and Extra Care Cycle are not available on models DDE8200R and
DDG8280R.
Check the Lint Filter
Clean the lint filter each time the dryer is used. Always be sure the lint
filter is in place.
Don’t use the dryer without it. See Care and Cleaning section.
Sort and Load the Clothes
Good sorting for the dryer begins at the washer. Generally, if clothes are sorted right for washing, they’re sorted
right for drying. See the How to Sort the Clothes section. If you do mix various types of fabrics in your load, set
the controls for the lighter-weight fabrics and remove when dry. Reset controls for the remaining heavier fabrics.
Set
the
Controls.
See Controls Setting Guide.
~Drying
Selections.
9
Push a button to select the proper heat for your load.
E
Drying
Selections
Cottons
High Heat
Perm. Press
Medium Heat
Knits/Del
icates
Low Heat
Should be used with cycles indicated
Automatic
Automatic
Perm. Press and Timed
Regular cycle
Knits Cycles Cycles
@
Cycle Selector.
Turn the Cycle Selector to the desired cycle setting.
The
selector may be turned in either direction.
6
Extra Care Cycle (on
sotne
models).
Operates only with the Automatic Perm.
Press and Knits cycles.
Turn the control knob to ON if desired. To
minimize wrinkle setting in clothes, the Extra
Care cycle provides approximately 15 minutes
of no-heat tumbling after the clothes are dry.
Use End-Of-Cycle Signal if your dryer has one.
Signal will sound at 5-minute intervals to remind
you to remove the clothes.
End-of Cycle Signal (on some models).
Set End-of Cycle Signal, if desired. See
next page.
Start Button.
Press the Push to Start button to start the dryer.
(Opening the door during operation stops the
dryer. To restart, close the door and press the
Push to Start button,)
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General Electric DDE8500R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General Electric DDE8500R in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info