1 REMOVE PACKAGING
CAUTION: Refrigerator is
Top-Heavy—be careful when moving.
When using an appliance dolly, handle
from Freezer side only.
• Carefully cut banding at the top and bottom;
remove outer carton.
• Slide out rear corner posts (2).
• Slide carton off top of cabinet.
NOTE: DO NOT LAY CABINET DOWN
IN ORDER TO REMOVE SKID!
• The unit is secured to the skid with
six 7/16″ bolts and six 1/2″ nuts.
• Remove all six 7/16″ bolts that secure metal
brackets to the refrigerator.
• Remove the three 1/2″ nuts and washers
from the Freezer side.
• Remove nut from rear wood block
on Freezer side.
• Tilt unit up on Freezer side toward
Fresh Food side.
• Push bolts down, remove metal bracket
from Freezer side. Remove wood block
from Freezer side.
• Slide the appliance dolly underneath
the Freezer side.
• Using corner posts (2 on front corners)
to prevent damage, secure unit to
appliance dolly.
NOTE: If corner posts are too long, cut the posts
to a shorter length.
• Lift the unit off the skid with the appliance dolly.
• Remove toekick taped to the top of the unit.
• Set toekick aside for final installation.
CAUTION: DO NOT ATTEMPT TO ROLL
OR DRAG UNTIL UNIT IS OFF SKID.
CAUTION: MAKE SURE THE WATER
LINE IS CLEAR OF APPLIANCE DOLLY TO AVOID
DAMAGE.
