685346
29
Zoom out
Zoom in
Previous page
1/68
Next page
33722 D MMG130DI4/175DI4/205DI4 Operating Manual 23
Section 3 - Operation
PRESTART CHECKLIST
Before starting the unit, all items in the prestart checklist must be completed. This checklist applies to both manual
and remote starting of the unit.
Read and understand ALL safety sections at the beginning of this manual.
Verify all maintenance procedures are up to date. For more information, refer to General Maintenance
and Basic Maintenance Schedule - John Deere Engine.
The unit must be level.
The unit must be dry. Verify if any water is inside, on, or near the unit; dry if needed.
For grounding requirements, follow any local, state, or National Electrical Code (NEC) guidelines.
Verify the Control Power switch is OFF (O).
Verify all circuit breakers are OFF (O).
Inspect all electrical cords; repair or replace any that are cut, worn, or bare.
Verify oil, coolant, and fuel levels. For more information, refer to General Maintenance.
Verify battery connections are secure.
Turn the battery disconnect switch on, if equipped.
Verify the engine fan belt tension and condition.
Verify the engine fan belt guard.
Verify the engine exhaust system for loose or rusted components.
Verify all covers are in place and secure.
Verify all electrical connections at the connection lugs, if equipped, are tight and wired correctly.
Verify the voltage selector switch is set to the desired voltage and locked.
Verify the emergency stop switch is pulled out.
Verify the radiator and surrounding shroud are clear of debris.
MANUALLY STARTING THE UNIT
All units equipped with the Power Zone™ controller will initially start up in Stop mode. Use the following procedure
to start the generator in Manual mode:
1. Move the Control Power switch to ON (I).
DANGER
CARBON MONOXIDE: USING A GENERATOR INDOORS CAN KILL YOU IN MINUTES.
2. The LCD window will show the prestart diagnosis and the controller will load the unit management software.
Figure 3-1. Startup Screen
00414
82%
Image File Transer...
TM
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Generac MMG175DI4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Generac MMG175DI4 in the language / languages: English as an attachment in your email.

The manual is 4,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info