503629
5
Zoom out
Zoom in
Previous page
1/19
Next page
CDX-2500G
5
FUNCTIONS: (
CONTINUED)
13
SINGLE: PressingtheSINGLE button engagesSINGLEmode, in this
m
ode the CDX-2500G willplay one song and then stop.Pressing the
SINGLE button again will then activateCONTINUOUS mode causing
the unit to play continuously (after the last track, the unit will return to
the first track of the disc and continue to play).
TIME: The TIMEBUTTON switches the time displaybetween three
availablesources, these three are TIMEELAPSED on the track, TIME
REMAINING on the discandand TIME REMAINING on the track.
TIME ELAPSED indicates howmuch time has currently gone by since the
playbutton waspressed, TIME REMAING ONDISC will count downthe
time remaining on theentirediscand TIME REMAINING ONTRACK
counts down the time that is left beforethe end of thetrack.
PITCH:Pushing the PITCH button(thebuttonwill light up blue) activates
the PITCHCONTROL SLIDE. Thepitch or speed of theCD will change
plus or minus 12%dependingon the position of thePITCH CONTROL
SLIDER. Push the PITCHbutton againto deactivate this mode.
PITCH CONTROL SLIDE: Movingthe PITCHCONTROL SLIDE
upor down willlower orraisethe pitch percentage+ or-12%.
PITCH BEND: Pushing the PITCH BEND BUTTONS will automatically
raise thepitch up to+16% orlower the pitch down to-16% from the
existingpitch setting.Releasing thebuttonswill return thepitch
tothe original pitch setting. You canuse thisfunction to match the beat
whenmixingfromone songto another
LOOPSECTION: A LOOP repeats thesection betweenthe entry point
(IN)and theexit point(OUT). Toset a loopwhile theunit isplaying,
startbypressing the INBUTTON(it will light up)and when youreach
thedesiredend looppointpress theOUT BUTTON (itwill also light up).
Theloop will continueplaying until youpress theOUT BUTTONagain
allowingthe musicto continuefromthat point on,to re-engagethe loop
you must press theRELOOPBUTTON.Whenyouhavereleased your
loopthe OUTBUTTONwillturnOFF andthe IN BUTTONwill remain lit
toindicatethat your loop is stored in theCDX-2500Gmemory.Pressing
theIN BUTTON again while the unitis playingwill erase the previously
saved loopwhilesaving yournewloop entrypoint.Press OUTto exit the
loopand save anew complete loop.
Press RELOOPto return tothe beginning of thepreviously savedloop
from normalplay.PressRELOOP repeatedlyto causethe loop to stutter.
NOTE: THEFIRSTLOOPWILLHAVE APAUSEATTHE EXITPOINT,
WHILEALLOTHERSWILLBE SEAMLESS.
PLAY/PAUSE:Each pressof the PLAY/PAUSEBUTTON
causes the operationto change from PLAYtoPAUSE or fromPAUSE
back toPLAY.The PLAY/PAUSE BUTTONremainslit whenin PLAY
mode,while itblinksin PAUSEmode.
CUE:Whilethe unit isplaying andafter thecue point has been
programmed, pressing CUE willcausethe CD player to enter the
PAUSE mode(PLAY/PAUSE BUTTON blinks) at the programmedcue
point (the CUELED islit).Holding downthe CUE button
changes thefunctionto preview ,and allowsyouto stutter start orplay
from theprogrammedCUEPOINT Releasing the CUE buttonwill return
theCD tothe presetCUE point.
STOPBUTTON: When pressedthe STOPBUTTONstopsthe playback
of the CDplayer.
14
15
16
17
18
19
20
21
22
TRACKSELECTION: TheTRACKSELECTIONbuttonslet you select
thetrack toplay. +10 allows you to scan through thetrack selection
inincrementsof 10. TRACKSKIPallows you toscan througheach
trackone ata time.
NOTE: ONCEYOU HAVE SKIPPED TOANOTHERTRACK, YOUMAYNOT GO BACKTOYOURPRO-
G
RAMMEDCUEPOINT. YOUMUST BEGIN YOURCUE SELECTION OVERAGAIN,THE CUEWILLBE
PRESETTOTHE BEGINNINGOF THENEWLEYSELECTEDTRACK.
V
IDEOGRAPHICS OUT: . For CD+G (Karaoke)support,using RCA
cables, plug oneRCAconnector intothe CDGOUTPUT & plugthe
other connectorinto the Videoinputof your graphicsplayer monitor.
C
DGOPERATIONS:
1. After making theproperconnections & thepowerfor the unit ison,
press the OPEN/CLOSE button,place a CDG inthe DISC TRAY&
press the OPEN/CLOSE button again. The traywillclose intothe unit.
2. Turnon themonitor screen & waituntilthe CDX-2500Greadsthe
CDGdisc. When the monitor ison& thedisc isread, the title track
should appearon the screen.
3. Push theTRACKSKIP buttons toselect thetrack you wantto play.
4.Pressthe PLAY/PAUSE buttons & theunit willinstantlyplay.
TROUBLESHOOTING:
-If adisc willnot play,check tosee if thedisc was loaded correctly
(label side up). Also check thedisc for excessivedirt, scratches, etc.
-If thedisc turnsbut there is no sound, check thecable connections,
if they areok, check youramplifieror reciever.
-If theCD skips, check theCD for dirt orscratches. Donot assume that
theCD playeris defective. Manycd’s are recorded outof spec and
willskip onmost orall CDplayers.Before sendingthe unitforrepair,
tryplaying a CD that you aresure plays properly.
SPECIFICATIONS:
GENERAL:
Type................................................................................Compact Disc Player
DiscType...................................StandardCompact discs (12cm & 8 cm)
TimeDisplay......................TrackElapsed,Track Remain,or Total remain
VariablePitch.......................................±12% Slider withResume Switch
Pitch Bend............................................................................± 16% Maximum
Instant Start....................................................................Within 0.03 seconds
Installation...........................................................................................19" each
Dimensions.........Mainunit:19" x 3.5"x 10"(482.6 x88.9 x 254mm)
…….........…Remoteunit: 19" x 3.5"x3.5"(482.6 x88.9 x 88.9 mm)
Weight Per Unit..........................................Main unit: 11.35 lbs. (5.14 kg)
…...................................................................Remote unit: 3.85 lbs.(1.74kg)
AUDIO SECTION:
Quantization.....................................1 BitLinear/Channel, 3Beam Laser
Oversampling Rate..............................................................................8Times
Sampling Frequency..........................................................................44.1kHz
Frequency Response............................................................20Hz to20 kHz
Total Harmonic Distortion...................................................LessThan 0.05%
Signal to NoiseRatio..............................................................................85 dB
Dynamic Range........................................................................................85dB
Channel Separation.................................................................85dB (1KHz)
Output Level...................................................................2.0 +/- 0.2V R.M.S.
PowerSupply.......................................................AC 115/230V, 60/50Hz
SPECIFICATIONS ANDDESIGNARE SUBJECTTOCHANGE WITHOUTNOTICE FOR
PURPOSEOFIMPROVEMENT.
23
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gemini CDX-2500G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gemini CDX-2500G in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 3,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info