Manual Gemini CDMP-6000 (page 6 of 22) (English, German, French, Spanish)

503402

Zoom out

Zoom in

1/22

CHANNEL ROTARY GAIN: The CHANNEL ROTARY GAIN allows

you to boost the signal of each individual channel depending on how

low or high its input level is.

3 BAND EQUALIZER: The 3 BAND EQUALIZER adjusts the tone of

each CHANNEL by giving you a choice 3 frequencies (BANDS) to ad-

just , from LOW, MIDRANGE (MID) and HIGH’s ,you can use the ad-

justment knobs to higher or lower the 3 separate frequencies till the

sound of the music program is appropriate for your listening environ-

ment.

CHANNEL INPUT SELECTOR: The CHANNEL INPUT SELECTOR

switches allow you to choose which input will be controlled by that

channels corresponding volume FADER.

For example on CHANNEL (1) the INPUT SELECTOR allows you to

choose between CD 1 and PHONO 1/LINE 1, and also on CHANNEL

(2) the INPUT SELECTOR SWITCH will let you choose between

PHONO 2/LINE 2 and CD 2 .

CHANNEL VOLUME FADER: After you have chosen which input you

will use with the INPUT SELECTOR the corresponding CHANNEL

FADER will allow you to adjust the volume for that particular CHAN-

NEL.

MIXER SECTION:

MICROPHONE VOLUME: Allows you to adjust the volume of the

microphone signal. All MIC inputs are controlled by the same rotary.

MASTER OUTPUT ROTARY KNOB: The MASTER OUTPUT rotary

knob adjust the volume of the MAIN MASTER output.

CUE/PGM MIX ROTARY KNOB: The CUE/PGM MIX ROTARY KNOB

adjusts the mix between the CUE signal and the main output signal in

your HEADPHONE MONITOR OUTPUT.

CUE VOLUME ROTARY KNOB: The CUE VOLUME ROTARY KNOB

adjusts your HEADPHONE MONITOR OUTPUT’S volume.

CHANNEL CUE SELECTOR: The CHANNEL CUE SELECTOR al-

lows you to choose which channel you wish to monitor in your head-

phones. To the left is CHANNEL (1),to the right is CHANNEL (2).

VU METER: The CDMP-6000 has a stereo VU METER that allows you

to monitor the decibel levels of the LEFT and RIGHT MASTER output.

VU MASTER/CUE SWITCH: This switch controls what output the VU

METER will display. In the master position the VU will display the MAS-

TER output of the CDMP-6000, and in the CUE position the left VU will

display the channel (1)’s CUE output and the right VU will display

channel (2)’s CUE output.

CROSS FADER: The CROSS FADER allows you to mix evenly from

one source to another. The CROSS FADER on the CDMP-6000 is also

removable and if the need arises can be replaced. The RG-45 (RAIL-

GLIDE™) DUAL-RAIL CROSS FADER, which has internal dual stain-

less steel rails that allow the slider to ride smoothly and accurately from

end to end, can be purchased from your local GEMINI dealer.

The CURVE selector lets you choose between two fader CURVE set-

tings. Positioning the switch to the left will give you a gradual CROSS-

FADE and positioning the switch to the right will give you a quick

CROSSFADE.

HEADPHONE OUTPUT: The HEADPHONE OUTPUT located at the

front of the CDMP-6000 will accept any headphone with a standard

1/4” connector and/ or adapter and will allow you to CUE your music

program before you play it.You can adjust the volume and PGM mix of

the HEADPHONE (see CONTROLS).

NOTE: WHEN USING THECROSS FADER, LIGHTLY GLIDE THE FADER

BACK AND FORTH. PRESSING DOWNON THE CONTROLS CAN BEND

CONTACTS AND CAUSE ALOSS OF SOUND.

›TRACK SELECTION ROTARY: The TRACK SELECTION ROTARY allows

you to navigate through folders or tracks similarly in either USB or CD

mode. When navigating a standard CD turn the rotary to the right to ad-

vance the selection or turn the rotary to the left to decrease the selection.

Also the ROTARY knob allows you to search through music libraries on

your MP3, CD, or USB memory stick, rotate the knob until you have reached

the folder you wish to explore, folders will be identified by a (+) sign before

and after their name for example: +DANCE MUSIC+. If you have not cre-

ated a folder the song (track) files will appear with just the name of the file

which will scroll once across the display when selected then hold for eas-

ier viewing of track titles.

When you have reached the desired folder, press the ROTARY to open it or

when you have reached the desired track press the ROTARY to load it. If the

unit is in SINGLE mode the track will load and the PLAY/PAUSE button will

flash indicating that the song is ready for PLAY, or if you are in CONTINU-

OUS mode the desired track will start playing immediately.

Once a song/track is playing you may once again navigate through your

folders and tracks by simply turning the TRACK SELECTION ROTARY.

The display will go back to the last song or folder you were viewing. You

may then navigate from that point until you find your next song.The display

will show your choice for 10 SECONDS, then go back to the song informa-

tion of the song playing.

If you wish to go back and LOAD the song you chose simply PRESS THE

ROTARYTWICE, ONCE for the display to go back to the last song VIEWED

and SECOND to LOAD that song, you can also search from that point as

well. At any time when searching if you wish to go back to the ROOT level

of your drive directory or simply navigate backwards use the BACK button

as described previously.

FUNCTIONS: (CONTINUED)

CDMP-6000

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gemini CDMP-6000 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gemini CDMP-6000 Manual

Product: