Manual Gemini CDMP-6000 (page 4 of 22) (English, German, French, Spanish)

503402

Zoom out

Zoom in

1/22

POWER SWITCH: The POWER SWITCH turns the unit ON or OFF.

Make sure the switch is in the ‘OFF’ position prior to making any con-

nections.

GROUNDING SCREW When using (a) turntable(s), you will need to

ground the RCA cable(s) by screwing in the grounding fork(s) to the

GROUNDING SCREW located on the rear panel of the CDMP-6000.

MASTER XLR OUTPUT (BALANCED): Allows you to connect bal-

anced XLR cables to MASTER OUTPUT of the CDMP-6000 both the

RCA and XLR outputs can be used at the same time but are both con-

trolled via the same MASTER OUTPUT.

MASTER RCA OUTPUT: The MASTER RCA output connects the

mixer to your main amplifier using standard audio cables with

RCA-type connectors.

The RECORD RCA OUTPUT output jacks can be used to connect the

mixer to the record input of your recording unit, thus enabling you to

record your mix with RCA cables.

CONVERTIBLE PHONO/LINE INPUTS: The CDMP-6000 has

2 CONVERTIBLE (Switched) PHONO/LINE (PH/LN) RCA INPUTS.

The switches which are located to the right and left of the RCA inputs

for channels 1 and 2 allow you to choose between a PHONO

(Turntable) input or a LINE level (Mp3, CD, Tape player etc..)and re-

quire the proper switching. When switched to the PH position you may

use any Turntable with a magnetic cartridge, remember to connect your

ground wire (see GROUNDING SCREW) or there may be a system

hum.

MIC (MICROPHONE) INPUTS: The main MIC or Microphone inputs

are located at the back right hand corner and front middle of the CDMP-

6000 and will accept any balanced and unbalanced XLR as well a stan-

dard 1/4” connector. You can control the gain for the MICROPHONE

VOLUME rotary located on the top panel.

FUNCTIONS:

DISC TRAY: The DISC TRAY is where the CD is held during loading,

unloading and playback, and holds both 12 cm and 8 cm CD’s.

(DO NOT FORCE THE CD TRAY TO CLOSE EXCESSIVE FORCE

WILL DAMAGE THE CD MECHANISM, USE THE OPEN AND

CLOSE BUTTONS)

EJECT BUTTON: (THE PLAYER MUST BE IN PAUSE MODE TO

EJECT A CD) Once PAUSED Pressing the EJECT BUTTON will

eject the CD.

INTRODUCTION:

FEATURES:

SAFETY SPECIFICATIONS:

PRECAUTIONS:

CONNECTIONS:

MAIN POWER RECEPTACLE: This is a Standard 3-prong IEC power

connector. Connect the detachable line cord (included in the box with

your CDMP-6000 to the power receptacle, and plug the other end of the

line cord into an AC outlet. The CDMP-6000 has a universal power sup-

ply that can accept any AC voltage from 100 VAC to 240 VAC. No need

for voltage select switches. It will work virtually anywhere in the world. It

is less susceptible to voltage sags or spikes than conventional power

supplies, providing greater electro magnetic isolation and better protec-

tion against

AC line noise.

IN THE USA ~ IF YOU EXPERIENCE PROBLEMSWITHTHIS UNIT CALL

GEMINI CUSTOMER SERVICE AT: 1(732)346-0061. DO NOT ATTEMPT TO

RETURN THIS EQUIPMENT TO YOUR DEALER.

Congratulations on purchasing the Gemini CDMP-6000 CD Player.

This state of the art professional table top CD player is backed by

a 1 year warranty. Prior to use, we suggest that you carefully read

all the instructions.

Audio CD, CD-R & Mp3 compatible

- Play files with the extensions .MP3 and .WAV

from USB memory sticks*

- BPM (TAP) Read Out

- 3 Selectable Jog modes Pitch Bend/Search/Scratch Effect

- Instant-start & cue with preview

- Single & continuous play modes

- Seamless loop with reloop

- Pitch bend via jog wheel or buttons

- Two mode time selection

- Variable pitch control with three settings +/- 8,16 & 24%

- 3-band EQ w/ Gain Control

- 1/4” headphone output

- XLR and 1/4” mic input

- Auxiliary Inputs for Phono or Line devices

Laser Diode Properties

Material: Ga - Al - As

Wavelength: 755 - 815 nm (25° C)

Laser Output: Continuous Wave, max. 0.5 mW

1. Do not use this CD player at temperatures below 41°F/5°C or

higher than 95°F/35°C.

2. The apparatus should not be exposed to dripping or splashing,

and no objects filled with liquids such as vases should be placed

on the apparatus.

3. Place the unit in a clean and dry location.

4. Do not place the unit in an unstable location.

5. When disconnecting the power cord from the AC outlet,

always grasp it by the plug. Never pull the power cord.

6. To prevent electric shock, do not remove the cover or the bot-

tom screws.

7. There are NO USER SERVICEABLE PARTS INSIDE.

Please refer to a qualified technician.

8. Do not use chemical solvents to clean the unit.

9. Keep the laser pickup clean by keeping the tray closed.

10. Keep this manual in a safe place for future reference.

CDMP-6000

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gemini CDMP-6000 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gemini CDMP-6000 Manual

Product: