Manual Gemini cdm-3600 (page 6 of 23) (English, German, French, Spanish)

161525

Zoom out

Zoom in

1/23

CDM-3600

3 BAND EQUALIZER: The 3BAND EQUALIZERadjusts thetone of each CHAN-

NELby giving you achoice 3frequencies (BANDS) toadjust ,from LOW,

MIDRANGE (MID) and HIGH’s ,you canuse theadjustment knobs to higheror

lower the 3 seprate frequencies tillthe soundof the music program isapprop-

priate for your listeningenviroment.

CHANNELVOLUME FADER: Afteryouhave chosen which inputyou will use with

the INPUTSELECTORthe corresponding CHANNEL FADER will allow you to ad-

just thevolume for thatparticular CHANNEL.

CHANNELCUE SELECTOR:The CHANNELCUESELECTOR allows you tochoose

which channel you wish tomonitor inyour headphones, tothe leftis CHANNEL

(1) tothe rightis CHANNEL(2).

CUEVOLUME ROTARYKNOB: The CUE VOLUME ROTARY KNOBadjusts your

HEADPHONEMONITOR OUTPUT’Svolume.

MICROPHONEVOLUMEROTARYKNOB: Allows you toadjust the

volume of the microphone signal.

MASTEROUTPUT ROTARY KNOB:The MASTEROUTPUTrotary knobadjust

the volume of the MAIN MASTERoutput.

VUMETER: The CDM-3600 has a stereo VUMETERthatallows you tomonitor

the deciblelevels of the LEFT and RIGHT MASTERoutput.

FADER START BUTTON: TheFader Start function allows you tostart CD play-

back simply by moving the CROSSFADER from side to side.

A. Cueup theCD playeryou wish to startusing the Fader Start function

B. Move the CROSSFADER allthe way tothe oppositeside of theCD

youhave justCued.

C. Pressthe FADERSTART SELECTOR buttonso thatthe button

becomes illuminated.

D. Atthe pointwhich you wishto start the audio from theCued CD,

simply move the CROSSFADER in the direction of the CuedCD player,

and playback will begin.

E. Whenthe CROSSFADER is moved all the way to the opposite side of

the currentlyplaying disc, the unitwill stopplaying that disc andreturn to

the beginningof the track orthe set cue point.

CROSS FADER: TheCROSSFADER allows you to mix evenly from one sourceto

another. The CROSSFADERon theCDM-3600 is also removable andif the need

arises canbe replaced.TheRG-45(RAILGLIDE

™) DUAL-RAILCROSSFADER,

which hasinternal dualstainless steel rails thatallow the slider toride smoothly

and accurately from end to end can be purchased from your localGEMINI

dealer.

NOTE:WHENUSING THECROSSFADERLIGHTLYGLIDETHE FADER BACKAND

FORTH.PRESSINGDOWN ONTHECONTROLS CANBENDCONTACTSANDCAUSE A

LOSSOFSOUND.

TROUBLESHOOTING:

- If a discwillnot play, check to seeif the discwas loadedcorrectly

(labelsideup). Also check the disc for excessive dirt, scratches,etc.

- If the disc turns but there isno sound, check the cable connections,

if they are ok,check youramplifier orreciever.

-If the CDskips, check the CDfor dirt or scratches.Do notassume that

the CDplayer isdefective.Many cd’sare recordedoutof spec and

will skip onmostor all CD players.Before sendingthe unit for repair,

try playing aCD that you are sure plays properly.

SPECIFICATIONS:

GENERAL:

Type................................................................................Compact Disc Player

Disc Type...................................Standard Compactdiscs(12 cm & 8cm)

Time Display......................Track Elapsed,Track Remain,or Total remain

Variable Pitch.......................................±12%SliderwithResume Switch

Pitch Bend............................................................................± 16%Maximum

Instant Start....................................................................Within0.03seconds

Installation...........................................................................................19" each

Dimensions........................... 19"x3.5" x 10"(482.6x88.9 x 254 mm)

Weight..........................................................Main unit: 11.35lbs.(5.14kg)

AUDIOSECTION:

Quantization......................................1Bit Linear/Channel, 3 Beam Laser

Oversampling Rate..............................................................................8Times

Sampling Frequency..........................................................................44.1 kHz

Frequency Response............................................................20 Hzto 20kHz

TotalHarmonicDistortion...................................................Less Than 0.05%

Signalto Noise Ratio..............................................................................85 dB

Dynamic Range........................................................................................85dB

Channel Separation.................................................................85 dB (1 KHz)

OutputLevel...................................................................2.0 +/- 0.2VR.M.S.

Power Supply.......................................................AC 115/230V,60/50Hz

INPUTS:

Phono.............................................................................3mV,47KOhm

Line..........................................................................150mV,27KOhm

MIC...................................................................1.5mV,1KO balanced

OUTPUTS:

Max..........................................................................20VPeak-toPeak

Rec.............................................................................225mV,5KOhm

SPECIFICATIONSAND DESIGNARE SUBJECTTOCHANGEWITH-

OUTNOTICEFORPURPOSEOF IMPROVEMENT.

MIXER SECTION: (CONTINUED)

1. UNSCREW THE FADER (B) SCREWS. DO NOT TOUCH INSIDE SCREWS (C) CAREFULLY

REMOVE OLD CROSS FADER AND UNPLUG CABLE (D)

2. PLUG IN THE NEW CROSSFADER INTO CABLE

(D) AND PLACE BACK INTO MIXER.

3. SCREW THE CROSS FADER TO MIXER WITH THE

FADERPLATE SCREWS (B)

4. REPLACETHE FACE OF THE MIXER AND SCREW

THE FOUR SCREWS BACKIN AND REPLACE THE

FADERKNOBS.

FADER REPLACEMENT:

Downloaded from www.Manualslib.com manuals search engine

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gemini cdm-3600 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gemini cdm-3600 Manual

Product: