479875
3
Zoom out
Zoom in
Previous page
1/5
Next page
4) ALARM FOR CUT WIRES: 4 flashing of the direction indicator lights, of the Led and 4 audible
signalling with low tone (BOP) at the same time of the optical signalling.
5) ALARM FOR EXTERNAL SENSORS/BONNET: 5 flashing of the direction indicator lights, of the
Led and 5 audible signalling with low tone (BOP) at the same time of the optical signalling.
NOTE: if the “AUDIBLE SIGNALLING” are de -activated, (during the programming of the
accessorial functions) are given only the optical signalling with the above-mentioned
modalities.
ACCESSORIAL FUNCTIONS
Besides the accessorial functions previously described, see “EXTERNAL SENSORS EXCLUSION /
POWER WINDOWS LOCKING / COMFORT” and “SIREN SOUND EXCLUSION” are available the
following programmable accessorial functions:
a) SELF-REARMING ACTIVATION
b) ALARM PASSIVE ARMING
c) PANIC ALARM / “CAR FINDER”
SELF-REARMING ACTIVATION
This function, when activated, determine the automatic arming of the alarm system if, after the alarm
arming, there are not voluntary actions on the vehicle from the user (DOOR OPENING or STARTING
OF THE VEHICLE’S ENGINE) within 45”.
The function avoid leaving the vehicle without protection, when, after the arming of the system the
transmitter n. 1 button is pressed unintentionally and the system is disarmed.
The optical / audible signalling described in this document show the automatic arming of the alarm.
The activation of the self-rearming involve the activation of the central door locking control;
therefore, to avoid involuntary activations of the alarm system it is COMPULSORY to connect
the button of the driver’s side door to the appropriate inlet of the alarm system.
NOTE: the emission of the audible signalling is subordinate to the activation of the same during the
programming phase of the accessorial functions.
AUTOMATIC LOCKING AND UNLOCKING OF THE DOORS
The function is activated only if the zalet function is choosen.
After 20 seconds from the starting of the vehicle engine (or only turning the ignition in On position) the
doors will be automatically closed.
After 2 seconds from the switching OFF of the vehicle engine (or turning the ignition key in OFF
position) the doors will be automatically opened.
If during the starting of the engine, or during the first 20 seconds before the closure of the doors a door
is left opened or it is opened the automatic closure will be inhibited. The function will be activated only
after the switching OFF and on of the vehicle engine. With this function it is maindetory to connect the
door pin switch OFF the driver door to the right inlet of the alarm system.
SYSTEM PASSIVE ARMING
This function, if activated, determines the automatic arming of the alarm system 45” after the engine of
the vehicle switching off. (The automatic arming of the alarm is signalled with the optical / audible
signalling described in this document).
The activation of the ALARM PASSIVE ARMING procedure is signalled (while the vehicle’s engine
switching off) through 1” flashing of the direction indicator lights and two flashing of the Led with the
contemporary emission of two audible signalling with high tone (BIP).
During the interval between the activation of the ALARM PASSIVE ARMING and the real activation of
the protection system it is possible to stop temporarily the procedure of activation of the protection
system opening the DRIVER’S DOOR. This allows the user to operate in the vehicle without obtaining
the arming of the system.
This condition of pause is signalled through the led lightning fix. The led switching off is obtained
closing the vehicle’s door.
NOTE: the emission of the audible signalling is subordinate to the activation of the same during the
programming phase of the accessorial functions.
PANIC ALARM / “CAR FINDER”.
The PANIC ALARM function, if activated, allows the user to activate the alarm optical and audible
signalling pressing on the transmitter n. 2 button.
The function is activate independently from the system arming / disarming condition. The alarm
signalling has a length less or similar to 30”; anyway it is possible to stop the signalling in every
moment pressing again on the transmitter’s n. 2 button.
Between a PANIC ALARM cycle and the following there is a neutral time of 5” where there are not
possible further activations of the alarm signalling.
During the alarm signalling and the neutral time the led is switched on with fix light.
IF DURING THE PROGRAMMING PHASE THE PANIC FUNCTION HAS BEEN DE-ACTIVATED, THE “CAR
FINDER” FUNCTION WILL ACTIVATE.
THE “CAR FINDER” FUNCTION ALLOWS WITH ALARM ARMED, TO OBTAIN A BRIEF OPTICAL / ACOUSTIC
SIGNALLING PRESSING ON THE TRANSMITTER N. 2 BUTTON. THIS FUNCTION IS USEFUL TO LOOK FOR
THE VEHICLE IN PARKING WITHOUT CAUSING UNUSEFUL CONDITIONS OF ACOUSTIC POLLUTION .
THE BRIEF OPTICAL / ACOUSTIC SIGNALLING CONSISTS OF THE EMISSION OF ONE LOW CHIRP (BOP) AND THE
DIRECTION INDICATOR LIGHTS FLASHING (SIGNALLING OF 1 SECOND).
NOTE: the emission of the audible signalling is subordinate to the activation of the same during
the programming phase of the accessorial functions.
LEARNING TRANSMITTERS CODE.
With this system it is possible to learn 4 transmitters with changeable code. The code of these devices
is memorized in the EEPROM system through a simple learning procedure.
If the peripheral devices of the security system have been perfectly connected (DOOR and
BONNET pin switches), it is possible to carry out the learning of the codes without intervene
directly on the alarm unit. This allows a simplification of the operations with a reduction of the
intervention time.
NOTE: to activate the learning procedure (with the PASSIV E ARMING PROCEDURE de-activated) it
is necessary to disarm the system with a transmitter or through the emergency PIN-CODE.
If the system is in the ALARM PASSIVE ARMING procedure it is necessary to arm and then to disarm
the system with a working transmitter (or to wait the end of the passive arming activation and then to
disarm the system introducing the emergency PIN-CODE).
Learning activation:
1) To open, and keep opened, the driver’s door of the vehicle.
2) To open, and keep opened, the bonnet of the vehicle (obviously, the protection button must be
connected to the alarm system.
3) Turn the ignition key to ON.
The system signals the inlet in the learning function with a series of optical / audible signalling
which consists of one flashing of the direction indicator lights and one audible high tone (BIP), one
flashing of the direction indicator light and one audible low tone (BOP).
4) Press one button of the transmitters to learn. The system will confirm the memorisation of the
device with a high audible tone (BIP) and one flash of the led simultaneous to the audible
signalling.
5) For all devices to learn with the alarm system it is necessary to carry out the operations from point
4 (max. 4 transmitters).
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gemini 7463 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gemini 7463 in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info