695920
23
Zoom out
Zoom in
Previous page
1/28
Next page
9.5.7 Set the TAM Language
You can choose the voice prompt language of the answering machine from a total of
3 languages.
1. Press MENU/OK and / to select ANS. MACHINE.
2. Press MENU/OK and / to select TAM SETTINGS.
3. Press MENU/OK and / to select TAM LANGUAGE.
4. Press MENU/OK and / to select the desired voice prompt language for the
answering machine.
5. Press MENU/OK to confirm
9.5.8 Turn On or Off the Base Screening
You can select to turn on or off the call screening on base. When the answering
machine is set to ON and when there is an incoming message, the base will start call
screening automatically after the preset numbers of rings of answer delay.
Using a handset:
1. Press LEFT SOFTKEY and / to select ANS. MACHINE.
2. Press LEFT SOFTKEY and / to select TAM SETTINGS.
3. Press LEFT SOFTKEY and / to select BS SCREENING.
4. Press LEFT SOFTKEY and / to select ON or OFF.
5. Press LEFT SOFTKEY to confirm.
9.5.9 Change the Compression Rate
Three different compression rates (HIGH, MID and LOW) are provided for you
to select different quality levels of recording incoming message. The lower the
compression rate, the higher the recording quality level attained, but the shorter the
total recording
time available.
Using a handset:
1. Press LEFT SOFTKEY and / to select ANS. MACHINE.
2. Press LEFT SOFTKEY and / to select TAM SETTINGS.
3. Press LEFT SOFTKEY and / to select COMPRESSION (Available
options: HIGH, MEDIUM, or LOW).
4. Press LEFT SOFTKEY and / to select your desired compression rate.
5. Press LEFT SOFTKEY to confirm.
9.5.10 Activate Remote Access
Your phone lets you check your messages, or otherwise operate your answering
machine, by calling the answering machine when you are away from home by
entering a 4-digit remote access PIN on a tone-dialing phone. Use the 4-digit
remote access PIN code to prevent other people from unauthorized access of your
answering machine.
9.5.10.1 Change the 4-Digit Remote Access PIN
Using a handset:
1. Press LEFT SOFTKEY and / to select ANS. MACHINE.
2. Press LEFT SOFTKEY and / to select TAM SETTINGS.
3. Press LEFT SOFTKEY and / to select CHANGE PIN.
4. Press LEFT SOFTKEY twice to enter the old PIN (default remote access
PIN is 0000).
5. Press LEFT SOFTKEY twice to enter the new 4-digit PIN.
6. Press LEFT SOFTKEY twice to enter the new 4-digit PIN again.
NOTE:
If the new PIN entered in Step 6 is not matched with the new system PIN entered in
Step 5, user is requested to enter the valid system PIN again in Step 5.
7. Press LEFT SOFTKEY to reconfirm.
9.5.10.2 Activate or Deactivate the Remote access
Using a handset:
1. Press LEFT SOFTKEY and / to select ANS. MACHINE.
2. Press LEFT SOFTKEY and / to select TAM SETTINGS.
3. Press LEFT SOFTKEY and / to select REMOTE ACC.
4. Press LEFT SOFTKEY and / to select ON or OFF to turn on or off
the remote access respectively.
5. Press LEFT SOFTKEY to confirm.
40 41
ANSWERIN
G MACHINE
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geemarc AMPLIDECT295 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geemarc AMPLIDECT295 in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Geemarc AMPLIDECT295

Geemarc AMPLIDECT295 User Manual - German - 28 pages

Geemarc AMPLIDECT295 User Manual - Dutch - 50 pages

Geemarc AMPLIDECT295 User Manual - Dutch - 2 pages

Geemarc AMPLIDECT295 User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info