695920
19
Zoom out
Zoom in
Previous page
1/28
Next page
8.4.4 Set the Flash Time
The default flash time is best suitable for your country and network operator. It is
unlikely that you should need to change this setting unless advised to do so.
1. Press LEFT SOFTKEY and / to select BS SETTINGS.
2. Press LEFT SOFTKEY and / to select FLASH TIME.
3. Press LEFT SOFTKEY and / to select your desired flash time (SHORT
100ms, MEDIUM 300ms, LONG 600ms).
4. Press LEFT SOFTKEY to confirm.
8.4.5 Change the System PIN Code
1. A 4-digit system PIN code is used for changing the system settings of the base
station. It is used to protect your phone against unauthorized use. The default
system PIN is 0000. Press LEFT SOFTKEY and / to select BS
SETTINGS.
2. Press LEFT SOFTKEY and / to select CHANGE PIN.
Press LEFT SOFTKEY and you are requested to enter the 4-digit system
PIN.
3. Enter the old system PIN.
4. Press LEFT SOFTKEY and enter the new system PIN.
5. Press LEFT SOFTKEY and enter the new system PIN again.
NOTE:
If the new PIN entered in Step 6 is not matched with the new system PIN
entered in Step 5, user is requested to enter the valid system PIN again in Step
5.
6. Press LEFT SOFTKEY to confirm the setting.
8.5 Registration
Your handset and base station is pre-registered. Up to five handsets can be
registered to a single base station.
If for some reason, the handset is not registered to the base station ( flashes even
when the handset is near the base station), register your handset according to the
following procedure.
On the cordless handset:
1. Press LEFT SOFTKEY and / to select REGISTRATION.
2. If you have more than one base, press LEFT SOFTKEY and / to select
the base number from BASE 1, BASE 2, BASE 3 and BASE 4. There will be a
behind the current registered base number.
3. Press LEFT SOFTKEY to display “PIN?” enter the 4-digit system PIN for
the base (default PIN is 0000).
4. Press LEFT SOFTKEY and the display will show “WAITING”.
5. At the same time, press and hold /HANDSET LOCATOR on the base to enter
the registration mode.
After a short delay, if the registration is successful, there will be a confirmation beep,
and the handset display will go back to idle mode with the new handset number
shown. The base display will also go back to idle mode.
32 33
PHONE SETTINGS
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geemarc AMPLIDECT295 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geemarc AMPLIDECT295 in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Geemarc AMPLIDECT295

Geemarc AMPLIDECT295 User Manual - German - 28 pages

Geemarc AMPLIDECT295 User Manual - Dutch - 50 pages

Geemarc AMPLIDECT295 User Manual - Dutch - 2 pages

Geemarc AMPLIDECT295 User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info