12.5.3 Delete a Personalized OGM (SET OGM to DEFAULT)
Using a handset:
1. Repeat Steps 1 to 3 in the section 12.5.2.
2. Press LEFT SOFTKEY and / to select DELETE.
3. Press LEFT SOFTKEY and RESET TO DEFAULT is displayed.
NOTE:
Your personalized OGM and return to previous menu and the pre-set OGM is
restored automatically.
12.5.4 Set the Answer Delay
You can set the number of rings before the answering machine answers and starts
playing your OGM. You can set the answering machine to answer after two to ten rings
or TIME SAVER.
The TIME SAVER function answers calls after 6 ring signals, until the first new message
has been registered then the answering machine switches to answering after
approximately 2 signals. This is useful when using remote access; if you call up the
answering machine and there is no reply after four rings that means there are no
messages recorded and you can hang up before you are charged for the call.
Using a handset:
1. Press LEFT SOFTKEY and / to select ANS. SYS.
2. Press LEFT SOFTKEY and / to select SET TAM.
3. Press LEFT SOFTKEY and / to select ANS. DELAY
4. Press LEFT SOFTKEY and / to select your desired answer delay.
(Available options: 2 RINGS, 4 RINGS, 6 RINGS, 8 RINGS, 10 rings or TOLL SAVE).
5. Press LEFT SOFTKEY to confirm.
12.5.5 Set the Recording Time of Incoming Message
You can set the maximum length of the recording time of the incoming messages.
Using a handset:
1. Press LEFT SOFTKEY and / to select ANS. SYS.
2. Press LEFT SOFTKEY and / to select SET TAM.
3. Press LEFT SOFTKEY and / to select RECORD TIME.
4. Press LEFT SOFTKEY and / to select your desired recording time
(Available options: 60S, 120S, 180S, or UNLIMITED).
5. Press LEFT SOFTKEY to confirm.
38
