764968
11
Zoom out
Zoom in
Previous page
1/18
Next page
10
Program menu
Instructions listed in this section assume the Program key is
used, but if there is no Program key on the keypad, use the
Light key instead.
The program menu is accessible by holding down the
Program key for 5 seconds� In the program menu the
following parameters can be set: clock, filter or purge cycles,
economy mode, heat pump mode and temperature units�
While in the program menu, use the Up or Down key to
adjust the parameters and use the Program key to jump
to the next parameter� The changes will be saved after the
confirmation of the last parameter only�
If there is no action taken for 15 seconds, the system will exit
the program menu and all changes will be saved�
Setting the clock
Enter the program menu by holding down the Program key
for 5 seconds� The display will show the current clock setting
with the hour flashing�
Depending on factory settings, your system may be set
to 24-hour time or 12-hour time� An additional dot can be lit
under the “:” separating hours and minutes to serve as an
AM icon�
Setting the hour: Use the arrow keys to adjust the hour� Press
the Program key to jump to the next parameter, the minutes�
Setting the minutes: Use the arrow keys to adjust the
minutes� Press the Program key to jump to the next
parameter, the filter or purge start time (FS)�
Programming the filter/ purge cycles
Depending on system configuration, your spa will
perform either a filter or a purge cycle� The filter cycle
menu consists of the following parameters: the start time
(FS), the duration (Fd) and the frequency (FF)� The purge
cycle menu consists of the following parameters: the start
time (FS) and the frequency (FF)�
A filter cycle consists of starting all the pumps and blower
in high speed for 1 minute (purge step) then, the pump
associated with the filter will run in low speed for the
remaining duration of the filter cycle (clean step)�
A purge cycle is used when the spa is equipped with a
24 hour circulation pump which provides a continuous
clean step� It consists of starting all the pumps and blower
in high speed for 1 minute�
Programming steps
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gecko in.k330 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gecko in.k330 in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gecko in.k330

Gecko in.k330 User Manual - French - 18 pages

Gecko in.k330 User Manual - Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info