764968
9
Zoom out
Zoom in
Previous page
1/18
Next page
8
Start or stop accessories
To start or stop an accessory, press the associated button� Indicators will light up when the associated accessory is on�
When an accessory has more than two states, press the button until it reaches the desired state� Indicators will
flash when dual speed pumps are on at low speed, and will be solid at high speed�
If you have a blower it will be controlled by the Pump 2 key� The order of actions is as follows: pump 2 on;
pump 2 high speed (if applicable); blower on; pump 2 off; blower off�
Keypad functions
Water temperature
The temperature shown on screen is the current water
temperature� Use the Up and Down buttons to set
the desired temperature�
The set point icon will appear at the top of the screen�
After 3 seconds without any change to the set temperature
value, the keypad will resume the normal display�
Off Mode
Pressing Pump 1 for 5 seconds will enable the Off mode�
This mode allows you to stop all outputs including
automatic functions such as filter cycle, heat request and
smart winter mode for 30 minutes to perform quick spa
maintenance� When Off mode is active, the display will
toggle between the “OFF” message, the clock and the
water temperature� Press Pump 1 or Pump 2 (if available)
to restart the system before the expiration of the 30 minute
delay� When the system resumes its normal operation, the
display shows “On“ for 3 seconds�
Keypad Lock
(Available only if the lock feature is enabled in the spa
controller configuration)
You can lock the keypad by selecting one of 2 security
levels: Partial or Full� The Partial level locks the set
point adjustment and many options in the settings menu�
The Full level locks all keypad functions�
Partial lock activation
Press both arrow keys simultaneously for 5 seconds�
The keypad will display "LocP"� Release both keys to
engage Partial lock�
Full lock activation
Press both arrow keys simultaneously for 5 seconds�
The keypad will display "LocP"� Keep pressing both arrow
keys for 5 more seconds (10 seconds total)� The keypad
will display "LocF"� Release both keys to engage Full lock�
To unlock the keypad (either Partial or Full), press and
hold both arrow keys for 5 seconds; the "uLoc" message
will be displayed for a few seconds as a confirmation�
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gecko in.k330 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gecko in.k330 in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gecko in.k330

Gecko in.k330 User Manual - French - 18 pages

Gecko in.k330 User Manual - Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info