617883

Geberit Sigma 80 Manual

16
Zoom out
Zoom in
Previous page
1/212
Next page
16
Settings
B1022-001 © 12-2011
D - Activating or deactivating the automatic
flush actuation
When the automatic flush actuation is activated, the WC
flush control always activates a flush when you step
back. Manual actuation is not necessary.
Setting 1 = deactivated
Setting 2 = activated
Prerequisites
The WC flush control is ready for operation.
If the sensors are not covered at the same time, a
flush will be activated. Remove your hands and
repeat the procedure.
1
Cover both sensors at the same time with both
hands at a distance of approx. 5 cm. After a few
seconds both sensors begin to flash. After a few
more seconds, the sensors flash red 3 times and
then turn blue. Now remove both hands.
2
Cover the sensor on the left with your hand until it
lights up orange. The sensor on the right flashes.
3
Cover the sensor on the left with your hand again
until it lights up yellow. The sensor on the right
flashes repeatedly to show the current setting 1.
or 2. (setting 1 = flashing once,
setting 2 = flashing twice).
Result
You are now in the setting mode for automatic
flush actuation.
4
Cover the sensor on the right repeatedly until the
desired setting has been made. Each time the
sensor is covered, the WC flush control changes
between the two settings (1-2-1-2- ...).
5
Cover both sensors at the same time with both
hands at a distance of approx. 5 cm until both
sensors flash once.
Result
The desired setting is now saved. The WC flush
control is ready for operation again.
E - Resetting to factory setting
The settings B, C and D are reset to the factory setting,
see Overview.
Prerequisites
The WC flush control is ready for operation.
`
Cover the sensor on the left for half a minute until
both sensors light up red. A flush is then triggered.
Result
The factory settings are restored.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geberit Sigma 80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geberit Sigma 80 in the language / languages: All languages as an attachment in your email.

The manual is 5,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info