617883

Geberit Sigma 80 Manual

14
Zoom out
Zoom in
Previous page
1/212
Next page
14
Settings
B1022-001 © 12-2011
A - Activating or deactivating the cleaning
function
The actuator plate and WC can be cleaned without
triggering a flush.
Prerequisites
The WC flush control is ready for operation.
If the sensors are not covered at the same time, a
flush will be activated. Remove your hands and
repeat the procedure.
1
Cover both sensors at the same time with both
hands at a distance of approx. 5 cm. After a few
seconds both sensors begin to flash. Now
remove both hands.
Result
The cleaning function is now active.
The cleaning function is automatically deactivated
after 3 min.
2
Now carry out the cleaning process. Remember
to follow the care instructions provided in these
operating instructions.
3
Cover both sensors at the same time with both
hands at a distance of approx. 5 cm to deactivate
the cleaning function. The flashing stops after a
few seconds. Now remove both hands.
Result
The cleaning function is deactivated. The WC
flush control is ready for operation again.
B - Selecting the colour of the sensor lights
The following colours can be selected:
Blue, turquoise, magenta, orange, yellow
Prerequisites
The WC flush control is ready for operation.
If the sensors are not covered at the same time, a
flush will be activated. Remove your hands and
repeat the procedure.
1
Cover both sensors at the same time with both
hands at a distance of approx. 5 cm. After a few
seconds both sensors begin to flash. After a few
more seconds, the sensors flash red 3 times and
then turn blue. Now remove both hands.
Result
You are now in the mode for setting the colour of
the sensor lights.
2
Place your hand in front of the sensor on the right.
The next colour appears on both sensors.
3
Place your hand in front of the sensor on the right
repeatedly until the desired colour is displayed.
4
Cover both sensors at the same time with both
hands at a distance of approx. 5 cm until both
sensors flash once.
Result
The desired light colour is now saved. The WC
flush control is ready for operation again.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geberit Sigma 80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geberit Sigma 80 in the language / languages: All languages as an attachment in your email.

The manual is 5,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info