Operating instructions Geberit AquaClean 8000plus
26
Refilling nozzle cleaner
As soon as the icon starts to flash on the remote control and the red LED lights
up on the control panel, the nozzle cleaner needs to be refilled. If the nozzle cleaner
tank is empty, only fresh water will be used to clean the spray nozzle.
Prerequisites
Geberit AquaClean 8000plus is switched on.
The nozzle cleaner may leak.
Do not squeeze the refill bottle.
1 Press the side of the maintenance flap and open it.
2 Pull out the filling tray as far as it will go.
3 Remove the cap from the nozzle cleaner and pour the nozzle cleaner into the filling
tray.
4 Reinsert the filling tray and close the maintenance flap.
1
2