Operating instructions Geberit AquaClean 8000plus
11
Using Geberit AquaClean 8000plus
Shower concept:
• The spray nozzle is automatically cleaned with fresh water before and after each
shower procedure.
• The rinsing chamber and spray nozzle are also cleaned after each shower
procedure with a cleaning agent and then cleaned with fresh water.
You control the intensity and aim of the water jet.
The shower spray gradually cools down continuously during the shower procedure.
Prerequisites
Odour extraction unit and drying are activated.
Thanks to the user detection, the shower procedure can only be activated once
someone sits down on the toilet. The Geberit AquaClean 8000plus can be used as a
normal toilet at any time.
1 Sit down on the toilet.
Result
The odour extraction unit starts automatically, ensuring that you do not leave any
unpleasant odours behind. It stops as soon as you stand up.
2 Press the <shower> button.
Result
The shower starts and stops after 20 s.
You can interrupt the shower procedure before this by pressing the <shower>
button.
The warm air dryer starts automatically at the end of the shower procedure. It stops
as soon as you stand up or press the <drying> button.
3 Press the <toilet flush> button.
