Operating instructions Geberit AquaClean 8000plus
8
<Lady shower>
The low spray intensity has a pleasant and gentle feel whilst cleaning.
Press the button: The spray arm moves into position and the shower
procedure starts. The shower stops after 20 s. You can stop the
shower before this by pressing the <shower> button.
<Toilet flush>
Press the button: Triggers a full flush
(Geberit AquaClean 8000plus with visible cistern).
<User profile>
Press the button: The user profile is activated with its saved settings.
<Massage spray>
The pulsating massage spray is pleasant and relaxing.
Press the button: The massage spray is activated. The function can be
activated before or during the shower procedure.
Press the button again: The massage spray is deactivated.
<Spray arm position>
To suit your sitting position, the spray arm can be moved forwards or
backwards through 7 positions in accordance with the directions
shown on the arrow button.
Press the button: Sets the position of the spray arm.
<Oscillating spray>
The oscillating spray intensifies cleaning efficiency.
Press the button: The oscillating spray is activated. The function can be
activated before or during the shower procedure.
The spray arm moves back and forth.
Press the button again: The oscillating spray stops.
<Water heater function>
Press the button:
• : Heating element is switched on. The water temperature is preset
to 37 °C
• : Economy mode (factory setting). In economy mode, the heating
element only switches on if user detection is activated. The warm-up
time is 3 to 4 minutes.
• : Heating element is switched off.
<Shower water temperature>
Sets the required shower water temperature.
Press the button: Increase or reduce temperature.
<Dryer air temperature>
Sets the required dryer air temperature.
Prerequisite: Select the drying function.
Press the button: Increase or reduce temperature.
