544879

Geba Tronic DC 3 ECO - Standard - de Luxe Manual

5
Zoom out
Zoom in
Previous page
1/18
Next page
industrial controls
®
industrial controls
®
532
E
C
O
PE
U V
W
N
M
3
~
Motor Brake
26
27
Connection emergency STOP, wire rope failure device & sectional door spring rope
failure device.
If you want to connect more than one safety element to the terminals 26/27 they
must be connected in series.
Connecting a traffic light
It is possible to connect a RED or a combination of RED/GREEN traffic lights.
To improve the lifetime of the traffic light bulb it is possible to connect a resistor 39Ω/2 watts
in series with the bulb of the traffic light. This resistor fits to a bulb power of 25 watts (recom-
mended maximum for all geba traffic lights). In addition to the traffic light it is possible to con-
trol an external light source.
1
3
4
6
7
9
PE
L1
Ampel
Rot
Grün
N
mains
Position of jumpers on the main board for safety edge
1. not connected: opto-electronic safety edge
connected: resistor 8,2 kΩ
2. not connected: dead man UP - direction
connected: impuls UP - direction
3. not connected: dead man DOWN - direction
connected: impuls DOWN - direction
If the Comfort module is connected the jumpers 2 and 3
must be removed.
!
1
23
UK
AUF
AB
F
D
Version France
Only if the Comfort module is connected. The dotted lined bridges have to be
connected - door movement with pre-warning.
Before the door moves a pre-warning
- 3 seconds flashing of red traffic light - is given.
UP
DOWN
green
traffic light
red
Connecting a 3-Phase motor
The 3-Phase motor is connected to U, V, W and PE. If the motor has an electric brake then
the brake has to be connected to the terminals W & N.
Changing the run direction
After the motor is connected to U, V, W & PE you must control the run direction with the UP
& DOWN push buttons. If the run direction does not match the push buttons arrow then you
have to exchange the wires on the terminals U & V.
Attention: Attend to the run direction of the limit switches !!
!
Connecting the mains cable
On the terminals L1, L2, L3. N and PE of the mainboard the mains cable has to be
connected. The value of the external fuses must be adapted to the connected motor. If the
motor is blocked it has to activate the external fuses.
… 5 …


Need help? Post your question in this forum.

Forumrules
1

Forum

geba-tronic-dc-3-eco---standard---de-luxe

Reset search

  • replacment had transmitters for gebatronic DC3 mini max 3 s Submitted on 31-1-2022 at 13:45

    Reply Report abuse

  • can i get replacemnt handheld transmitters for Gebatronic DC3 Mini Max 3S Submitted on 31-1-2022 at 13:44

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geba Tronic DC 3 ECO - Standard - de Luxe at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geba Tronic DC 3 ECO - Standard - de Luxe in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Geba Tronic DC 3 ECO - Standard - de Luxe

Geba Tronic DC 3 ECO - Standard - de Luxe User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info