544622

Geba Tronic Cody T4 Manual

9
Zoom out
Zoom in
Previous page
1/11
Next page
Description of the appliance
The TCS-Cody-T4 consists of a decoder and a keypad. These units are connected by a
simple double-wire cable without a special plug. The appliance connected is controlled by
the input of a correct pass code.
Passing code:
The pass code is either a four- or five-digit numeral code, by which you operate your
electric-door-lock. You have the possibility to store up to four different pass codes, which
means that up to four different persons with different pass codes can open the door. In case
you are accompanied by another person when entering your passing code you can at
first press as many keys as you like before you finally enter your code. This ensures that
no other person can notice your pass code. Nevertheless, the TCS-Cody recognizes your
pass code as correct! The TCS-Cody is preset by the company with the pass code 1234 on
memory location 01.
Blocking function:
For reasons of safety during attempts of manipulation the TCS-Cody -T4 automatically
blocks for 10 seconds after the input of a wrong pass code which is signalled with a
double sound signal. The end of the blocking time is signalled by a long sound signal.
Programming:
The appliance is programmed with four possible pass codes. The logic unit is fitted with
DIP SWITCHES (see figure below). Those four switches correspond to the four memory
locations for the individual pass codes.
In order to input a pass code set the corresponding switch to programming position
(ON-position). At the keypad now enter the desired four- or five-digit new code and ´
actuate the key-operated push button. Then set the switch back to normal operating
position. The relay now attracts and the door can be opened.
Any previously stored code in this position is now overwritten.
This procedure can now be repeated for the other three code positions.
Connection diagram:
Dear customer,
The Cody which you have purchased is one of our highest quality technical pro-
ducts. We have taken the greatest care in its manufacture to ensure that this
microprocessor controlled encoder reaches you in faultless condition. However in
the unusual event of suspected equipment failure please return the appliance
together with the enclosed warranty document to your dealer or direct to our
factory.
The extent of warranty exclusively refers to the free repair of malfunctions of the
appliance, which demonstrably are caused by faults in production or defective
material, inclusive of spare parts required for this purpose.
Therefore please first read the instructions of use carefully before you start
programming !!!
Warranty-document
On the below described encoder we grant a warranty of
2 years
Type: TCS - Cody - T4
Production date: ____________________________________________________
Sales date: ____________________________________________________
Dealers adress:
keypad
industrial controls
®
industrial controls
®
Spannungsversorgung
230V/50Hz
Tastatur
Trafo
N L1
DIP-Schalter
ON
1
2 3 4
3
2
Türöffner max. 7 VA
12V/AC
2
2
Switch fo
door-opener
DIP SWITCHES
power supply
Technical Data:
Supply voltage 230 V AC 50 Hz
Relay contact max 7 VA 12 V/Ac, approx. 5 sec.
Connections 2.5 mm
2
max.,
Ambient- -20 ˚C to +60 ˚C
temperature
door-opener
max. 7 VA 12V/AC
Trans-
former
… 9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geba Tronic Cody T4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geba Tronic Cody T4 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info