544622

Geba Tronic Cody T4 Manual

8
Zoom out
Zoom in
Previous page
1/11
Next page
Instructions for Assembly and Use
TCS - Cody - T4
Electronic encoder-type lock for electric door-openers
The TCS-Cody-T4 is a modern and safe keyless door-opening system. The TCS-
Cody-T4 can safely be used after programming the pass code. For opening the
door only a four- or five-digit numeral code (pass code) has to be entered
After correct input of the pass code and pushing the key button the electric door-
opener is activated.
Assembly Instructions
Assembly of the CODY keypad:
1. By slightly pushing the two latches at the right and left side of the keypad
from behind to the edge, remove the small frame from the keypad.
2. Now you see two fixingholes (diam. = 4 mm) at the front of the keypad.
By means of these you can fix the keypad onto the wall.
3. Connect the keypad to the logic unit by means of the twin-cable (up to 5 m long).
There is no particular polarity for the twin wires.
4. Now re-fix the small frame.
5. It is possible to connect in parallel up to four keypads if a thin connection cable, max.
total line cross-section 1.5 mm
2
, is used.
Keypads connected in this way must not be operated simultaneously.
Assembly of the logic unit (inside area):
1. Put the screw-driver into the gap of the enclosure front, push the screw-driver up and
open the enclosure.
2. Remove the control PCB (which is force fitted to the inside of the enclosure).
3. Locate the screwed glands supplied (sealing nipple left side) in the
enclosure and replace the PCB. (Please ensure PCB is firmly in position)
4. Bore the fastening holes and fix the enclosure bracket at the wall.
5. The wires for the keypad ensure through the left cable entry (sealing nipple), the wires
for the relay contact through the middle cable entry and the wires for the supply voltage
ensure through the right cable entry. Ensure tight seating of sealing nipple and cable
gland, otherwise the water-protection ot the appliance cannot be assured.
6. According to connection diagram connect the wires to the corresponding terminals.
geba GmbH is released of its obligations regarding guarantee and product liability if - without prior
permission - the unit has been modified, or if the installation is improper or not in accordance with
our instruction manual.
The installer has to take care that the EMC-regulations are respected.
GB
The most important characteristics of the TCS-Cody -T4 are:
⇒⇒ Simple operation, programming and assembly.
⇒⇒ Water-protected enclosure.
⇒⇒ A maximum of safety:
⇒⇒ The electronic decoder is separately installed in the
protected area
⇒⇒ 4 different pass codes can be stored
⇒⇒ Nearly unlimited data security, even with power failure
⇒⇒ Direct connection of electric door-opener.
industrial controls
®
industrial controls
®
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geba Tronic Cody T4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geba Tronic Cody T4 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info