Manual GE ZW3003 - 45639 (page 21 of 24) (English)

603156

Zoom out

Zoom in

1/24

3. When Receiving an All-On or All-Off Command

• Parameter 11 (number of steps or levels)

• Parameter 12 (timing of the steps)

• Length: 1 Byte

• Valid Values:

Parameter 11 (default = 1) Valid Values: 1-99

Parameter 12 (default = 3) Valid Values: 1-255

Ignore Start Level When Receiving Dim Commands

Please note: Every “Dim” command includes a start level

embedded in it. The 45639 can be set to ignore the start level

that is part of the dim command. Setting parameter 5 to a value

of 0 will cause the 45639 to dim or brighten from the start level

embedded in the command.

• Parameter No: 5

• Length: 1 Byte

• Valid Values = 0 or 1 (default 1)

Restoring Factory Defaults

All Conﬁguration Parameters can all be restored to their factory default

settings by using your master controller to delete/reset the device.

WARRANTY

JASCO Products warrants this product to be free from manufacturing

defects for a period of two years from the original date of consumer

purchase. This warranty is limited to the repair or replacement of

this product only and does not extend to consequential or incidental

damage to other products that may be used with this product. This

warranty is in lieu of all other warranties, expressed or implied. Some

states do not allow limitations on how long an implied warranty lasts

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of GE ZW3003 - 45639 in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

GE ZW3003 - 45639 Manual

Product: