813426
36
Zoom out
Zoom in
Previous page
1/48
Next page
36
CONTROL ASSEMBLY &
SERVICE HATCH
It is not necessary to remove the complete control assembly to
service or replace parts of this appliance. The following sections will
detail how to individually remove and replace each element.
The Vogue has a servicing hatch to allow access to the gas valve
and control assembly in the base of the rebox.
Remove the 4 screws holding the service hatch.
Remove the panel.
This will allow access to the rear of the valve.
Gas Valve Pilot Valve
Mag
Unit
Ignition
Lead
Reposition the service hatch and tighten the 4 screws.
This side face down
PILOT UNIT
The pilot assembly consists of 4 components which can be
individually changed:
A) Pilot burner bracket.
B) Electrode.
C) Pilot injector.
D) Thermocouple.
Electrode
Thermocouple Pilot Injector
Pilot Burner
Bracket
Ignition Lead
Pilot Pipe
Screw Screw
NOTE: Ensure the sealant surrounding the Electrode and
Thermocouple leads is replaced if disturbed or removed whilst
gaining access to these components.
IMPORTANT: UNDER THE TERMS OF THE
EXTENDED WARRANTY IT WILL BE COMPULSORY
TO CHANGE THE COMPLETE PILOT UNIT ON THIS
APPLIANCE IN YEARS 2 AND 4.
Turn the gas supply off at the isolation device, remove the door
and place to one side, carefully remove the ceramic fuel bed
components.
PILOT BURNER BRACKET
To remove the Pilot Burner Bracket:
First remove the electrode, pilot pipe and thermocouple as
described in the following sections.
Remove the 2 screws securing the bracket. The pilot burner bracket
can now be removed.
Replace in reverse order.
ELECTRODE
Pull the ignition lead off the electrode and undo the retaining nut.
Replace with a new electrode. Do not over-tighten the nut; this
could break the component.
Replace the ignition lead by pushing the spade connector onto the
terminal (electrode).
PILOT INJECTOR
Undo the pilot pipe from the gas valve and from the underside of
the pilot burner.
Remove the pipe and the injector drops out from the burner.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Vogue Range Conventional Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Vogue Range Conventional Flue in the language / languages: English as an attachment in your email.

The manual is 7.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info