813425
28
Zoom out
Zoom in
Previous page
1/52
Next page
28
TOP EXIT - UP & OUT
ENSURE THE BLACK DECORATIVE TOP AND
COLLAR ARE FITTED TO THE TOP OF THE
APPLIANCE PRIOR TO INSTALLATION OF A TOP
FLUE EXIT.
THIS MUST BE POSITIONED BEFORE INSTALLING
THE FLUE.
A restrictor may be required with top exit ues.
See Technical Specication for restrictor sizes.
WALL PLATE
A wall plate is supplied to secure the ue to the inside wall. Bend
the securing tab to 90° and slot the plate over the ue before
bringing the ue through the wall.
Mark the xing holes using the wall plate as a template.
The tab can be above or beneath the ue.
FLUE APERTURE
Mark the height from the top of the appliance to the centre of the
horizontal section.
TAKE CARE TO MARK OUT THE FLUE CORRECTLY. IT IS
DIFFICULT TO MOVE AFTER INSTALLATION.
Create a 152mm diameter hole for the ue using either:
a) a core drill, or
b) a hammer and chisel
Make good at both ends of the hole.
FLUE LENGTH
The nal length of the ue pipe includes the terminal.
The terminal is the only section that can be shortened.
DO NOT SHORTEN ANY OTHER SECTION OF FLUE PIPE.
Measure from the outside of the wall to the stop on the 90° elbow.
Fit horizontal ue section between the elbow and the terminal at this
stage, if required.
10mm
Wall plate
Mark the correct length all the way around the ue terminal section.
Insert the square cardboard sleeve into the ue to support the inner
tube.
Cut through the ue and sleeve.
REMOVE THE CARDBOARD REMNANTS FROM THE FLUE.
File the cut edge smooth.
FLUE AND APPLIANCE FIXINGS
Pull appliance and ue assembly away from the hearth.
Drill 4 xing holes for the wall plate and insert wall plugs supplied.
Put the horizontal ue onto the elbow and reposition the appliance.
Check the ue runs smoothly through the wall.
Fix the wall plate to the wall using the 4 black screws provided.
Drill through the xing tab of the wall plate using a 3.5mm drill.
Secure with the screw provided.
Make good and weatherproof around the outside of the ue.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Vogue Range Balanced Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Vogue Range Balanced Flue in the language / languages: English as an attachment in your email.

The manual is 8.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info