813425
27
Zoom out
Zoom in
Previous page
1/52
Next page
27
FLUE ASSEMBLY
Refer to Site Requirements for more details..
REAR EXIT - HORIZONTAL FLUE
FLUE LENGTH
Wall Mounted Models:
Measure the total wall thickness and add 25mm.
Other Models:
Measure the total wall thickness and add 75mm.
The total ue length gives a minimum clearance of 50mm between
the rear of the appliance and the wall.
Insert the square cardboard sleeve into the ue to support the inner
tube.
Cut through the ue and sleeve.
200mm min
550mm max
REMOVE THE CARDBOARD REMNANTS FROM THE FLUE.
File the cut edges smooth.
WALL MOUNTED BRACKET ONLY
Using the wall mounting bracket as a template, cut a 200mm ø hole
on the internal wall only.
Cut a 150mm hole on the outer wall for the terminal exit.
The Wall Mounted Kit is supplied with a protective sleeve for the
ue. This can be rolled to t through the hole in the internal wall.
Feed the sleeve through the hole in the internal wall. This will
expand in the cavity to protect the ue from debris etc.
Fit the ue as detailed
ALL MODELS
Terminal
On the outside wall:
Position the ue assembly into the hole. The terminal should be at
against the wall.
Make sure the terminal is vertical.
Mark the four xing holes.
Remove the terminal to drill the holes.
Insert wall plugs supplied.
DO NOT FIX THE FLUE AT THIS STAGE.
FLUE AND APPLIANCE FIXINGS
Position the appliance observing appropriate clearances.
Apply a bead of suitable weatherproof sealant (silicone or similar) to
perimeter of back face of terminal.
Weatherproof
Sealant
Feed the ue through the wall, making sure it runs smoothly.
On the inside wall:
Engage the ue in the inner and outer spigots.
Make sure rubber seals on the spigots are not damaged.
From outside:
Insert four screws in the anges of the ue terminal.
Check sealant has formed a water-tight joint to the wall.
Any terminal less than 2m above any access (level ground, balcony
or at roof with access) must be tted with the guard supplied.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Vogue Range Balanced Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Vogue Range Balanced Flue in the language / languages: English as an attachment in your email.

The manual is 8.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info