813417
14
Zoom out
Zoom in
Previous page
1/36
Next page
14
Installation Instructions
2.4 To access the controls and pressure test point:
Remove the glass front, liners, burner and splitter plate, refer
to Servicing, Replacing Parts, Section 3 - 7.
3Pressure Test Point
2.5 Check the pull of the ue system by applying a lighted
smoke pellet to the ue system opening If there is a denite
ow into the chimney, proceed with the installation. If not,
warm the chimney for a few minutes.
IF THERE IS STILL NO DEFINITE FLOW, THE FLUE MAY
REQUIRE ATTENTION - SEEK EXPERT ADVICE.
A drilling template is supplied in order to locate the
xing plates.
2.6 Remove the battery holder.
DO NOT PULL THE BRACKET AS THE LEADS ARE
ATTACHED. PLACE TO ONE SIDE. THIS IS TO ACCESS
THE LEFT HAND FIXING, SEE DIAGRAM 4.
4
2.7 Following the template instructions.
Fix the two brackets either to the hearth or the bench, see
Diagram 5.
Brackets
5
2.8 Lift the appliance so as to locate the carcass onto the xing
plates. There are two large holes the lower anges on the
front edges of the base, see Diagram 6.
Flanges
6
2.9 Place the two large washers over the studs and x with two
wingnuts, see Diagram 7.
Wingnut
Flange
Fixing Plate
Fixing stud
7
2.10 Replace the battery holder.
It is essential to use high quality batteries (Duracell or
equivalent) when replacing batteries in the handset or
control box.
ENSURE THE BLACK DECORATIVE COLLAR IS FITTED
TO THE TOP OF THE APPLIANCE PRIOR TO THE
INSTALLATION OF THE FLUE.
2.11 The ue system can now be connected to the appliance
ensuring all joints are sealed with a suitable re resident
sealant. Use self-tapping screws at the ue spigot joint.
2.12 Connect a suitable pressure gauge to the test point located
on the inlet tting and turn the gas supply on.
2.13 Temporarily replace the burner and light the appliance.
Check all gas joints for gas soundness.
2.14 Turn the appliance to a maximum and check that the supply
pressure is as stated on the databadge.
2.15 Turn the gas off and replace the test point screw.
Turn the gas back on and check the test point for gas
soundness.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Vision Large MK2 Series Conventional Flue Instructions at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Vision Large MK2 Series Conventional Flue Instructions in the language / languages: English as an attachment in your email.

The manual is 4.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info