813413

Gazco Studio Freestanding Conventional Flue Manual

38
Zoom out
Zoom in
Previous page
1/48
Next page
38
Servicing Instructions - Replacing Parts
7. Main Control Assembly
7.1 To access the main control assembly rst remove:
— Window frame
— Main burner
— Splitter plate
7. 2 To remove the splitter plate:
— Loosen the xing screws (one each side)
— Lift the front of the plate off the screws
— Pull forward and upwards, see Diagram 15.
15
7.3 It is now possible to access all of the Main Control
Assembly. The control box is covered by a metal bracket,
see Diagram 16.
Remove the screw securing the bracket and lift off carefully.
16
7.4 Disconnect the 2 cables marked 'A' in Diagram 17.
17
B
AA
Control Valve
Control Box
7.5 Disconnect the battery extension lead, Diagram 17, B.
The control assembly can now be lifted up and removed.
7.6 Reassemble in reverse order.
8. Pilot Unit Assembly
IMPORTANT: UNDER THE TERMS OF THE
EXTENDED WARRANTY IT WILL BE COMPULSORY
TO CHANGE THE COMPLETE PILOT UNIT ON THIS
APPLIANCE IN YEARS 2 AND 4.
8.1 Remove the screw retaining the pilot cover.
18
8.2 Cut the cable tie retaining the Vidaex sleeve and
disconnect the ignition lead from the electrode.
4.0mm
19
13mm
8.3 Undo the pilot pipe and thermocouple from the rear of valve.
8.4 Remove the 2 xing screws and retain the Vidaex sleeve
which is needed for the replacement.
8.5 Replace in reverse order.
8.6 Ensure the thermocouple and ignition lead are threaded
through the Vidaex and secured with a cable tie. There is a
cut out in the pilot shroud to hold the Vidaex.
8.7 Check for gas leaks.
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Studio Freestanding Conventional Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Studio Freestanding Conventional Flue in the language / languages: English as an attachment in your email.

The manual is 8.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info