813401
25
Zoom out
Zoom in
Previous page
1/32
Next page
25
10.3 Remove the burner casting by removing the 3 screws
located on the sides of the burner skin.
19
Venturi
Cover
10.4 Remove the screw on the back panel and remove the panel,
see Diagram 20.
20
10.5 Undo the 2 screws at the back of the firebox and carefully
withdraw the bracket.
21
10.6 Disconnect the 2 sensor wires.
10.7 Undo the 2 retaining screws.
10.8 Remove the sensor and the 2 plastic spacers,
see Diagram 22.
22
10.9 Refit the new sensor, ensuring that the plastic spacers are
between the sensor and the bracket.
10.10 Refit the leads, see Diagram 23.
23
10.11 Feed the cable back through the hole as you replace the
bracket. When the bracket is located correctly it will sit flush
with the back panel without force required. If not positioned
correctly the bracket will sit at an angle, see Diagram 24.
24
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Steel Manhattan Log Conventional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Steel Manhattan Log Conventional in the language / languages: English as an attachment in your email.

The manual is 2.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info