813401
21
Zoom out
Zoom in
Previous page
1/32
Next page
21
1. General
1.1 All main components can be replaced without removing the
appliance from its installation.
1.2 Ensure the appliance and surrounds are cool before servicing.
IT IS ESSENTIAL THAT THE GAS SUPPLY TO THE
APPLIANCE IS TURNED OFF AT THE ISOLATION
DEVICE BEFORE PROCEEDING FURTHER.
2. Removing the Door & Outer Casing
It will be necessary to remove the glass frame and steel
outer casing in order to access most components.
IMPORTANT: THE OUTER PANELLING AND
DECORATIVE TRIM OF THE APPLIANCE ARE MADE
FROM STEEL. TAKE CARE WHEN INSTALLING,
REMOVING AND STORING TO AVOID DAMAGING
THE OUTER CASING, HEARTH OR DOOR.
THE GLASS FRAME IS FRAGILE. TAKE CARE WHEN
HANDLING TO AVOID DAMAGE.
2.1 To remove the glass frame lift off the decorative steel trim,
see Diagram 1.
1
2.2 Remove the 8 screws holding the glass frame, see Diagram 2.
Take care to support the glass when removing the screws.
2
2.3 Remove the glass frame and place carefully to one side.
2.4 Carefully remove the top blanking plate and cast iron grille
and place to one side, remove the steel top, see Diagram 3.
If the unit has been connected to the top exit flue, it will be
necessary to lift the support the grille and steep top whilst
removing the outer steel casing.
3
2.5 Remove the 2 front panels as shown, see Diagrams 4 & 5.
4
5
2.6 Lift the right-hand decorative panel to disengage from its
locating brackets and remove from the appliance, see Diagram
6. It may not be necessary to remove the left-hand side.
6
This should allow full access to all major components.
2.7 Refit in reverse order.
Servicing Instructions - Replacing Parts
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Steel Manhattan Log Conventional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Steel Manhattan Log Conventional in the language / languages: English as an attachment in your email.

The manual is 2.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info