Manual Gazco Steel Manhattan Balanced Log (page 18 of 36) (English)

813399

Zoom out

Zoom in

1/36

Flue and Appliance Fixings

3.23 Position the appliance observing appropriate clearances.

3.24 Apply a bead of suitable weatherproof sealant (silicone or

similar) to perimeter of back face of terminal,

see Diagram 5 B.

3.25 Feed the flue through the wall, making sure it runs smoothly.

On the inside wall:

3.26 Engage the flue in the inner and outer spigots.

3.27 Make sure rubber seals on the spigots are not damaged.

From outside:

3.28 Insert 4 screws in the flanges of the flue terminal.

3.29 Check sealant has formed a water-tight joint to the wall.

3.30 Finally secure the flue to the spigot by drilling a 3.5mm hole

through the larger hole in the spigot and insert the stainless

steel screw provided, see Diagram 5 C.

3.31 Any terminal less than 2m above any access (level ground,

balcony or flat roof with access) must be fitted with the

guard supplied, see Diagram 6.

Installation Instructions

3B Top Exit - Up & Out

3.32 There are two types of top exit flue terminals: vertical and

horizontal (see Site Requirements, Diagram 3, for minimum

and maximum flue lengths).

Decorative Cover

3.33 There is an optional decorative collar, Part No: 8548, to

cover the gap between the top plate and flue.

THIS MUST BE POSITIONED BEFORE INSTALLING THE

FLUE. WHEN INSTALLING A TOP EXIT FLUE, REFER

TO INSTALLATION INSTRUCTIONS, TECHNICAL

SPECIFICATION (PAGE 10) FOR THE APPROPRIATE

SIZE RESTRICTOR.

Restrictors for flues with both Vertical and Horizontal

Sections

Vertical Flue Height Horizontal Length Restrictor Size

500mm - 1490mm 250mm - 1000mm No restrictor

1500mm - 3000mm 250mm - 5000mm Ø 75mm

Reversing Spigots

3.34 The appliance is factory set for rear exit. For top exit reverse

the spigots and blanking plates, see Diagram 6.

Take care not to drop or damage the gaskets. If a restrictor

is required fit this between the small outlet spigot and the air

duct, see Diagram 7. The large outer spigot must be fitted

with the flue fixing hole facing forward.

3.35 REMEMBER TO FIT THE OPTIONAL DECORATIVE

COLLAR IF REQUIRED.

3.36 If the horizontal terminal is used assemble the required

amount of vertical flue including the 90° elbow onto the

appliance.

3.37 Drill through the fixing hole in the spigot using a 3.5mm drill

and secure with the screw provided.

Do not forget the optional decorative collar if you have

purchased one.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Steel Manhattan Balanced Log in the language / languages: English as an attachment in your email.

The manual is 2.45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gazco Steel Manhattan Balanced Log Manual

Product: