813399

Gazco Steel Manhattan Balanced Log Manual

17
Zoom out
Zoom in
Previous page
1/36
Next page
17
Installation Instructions
3.3 Remove the 8 screws holding the glass frame,
see Diagram 2.
Take care to support the glass when removing the screws.
2
3.4 Remove the box and place in a safe location.
REFER TO SITE REQUIREMENTS SECTION FOR ALL
FLUE OPTIONS.
The appliance is suitable for TOP or REAR flue exit. If a
rear flue has been purchased proceed to 3A . If a top exit is
required, proceed to 3B/ 3C.
3A. Rear Exit - Horizontal flue
3.5 Wall thickness: MIN = 200mm
MAX = 600mm
3.6 Unpack the adjustable flue assembly and terminal guard.
Do not lose the fixings.
3.7 Consider the final appliance position ensuring you comply
with clearances required for the external flue, see Site
Requirements, Section 1.
3.8 Mark the vertical centre-line of the appliance on the wall,
see Diagram 3.
3.9 Mark the height from the top of the hearth to the centre
of the flue, see Diagram 3, B.
TAKE CARE TO MARK OUT THE FLUE CORRECTLY. IT
IS DIFFICULT TO MOVE AFTER INSTALLATION.
3
A B
Steel
Manhattan 152 509
Flue Aperture
3.10 Create a 152mm (6”) diameter hole for the flue using either:
a) a core drill, or
b) a hammer and chisel
It is advisable to drill small holes around the circumference
when using method b).
3.11 Make good at both ends of the hole.
Flue Length
3.12 Measure the total wall thickness and add 65mm.
3.13 The total flue length gives a minimum clearance of 50mm
between the rear of the appliance and the wall.
3.14 Insert the square cardboard sleeve into the flue to support
the inner tube.
3.15 Cut through the flue and sleeve, see Diagram 4.
4
3.16 REMOVE THE CARDBOARD REMNANTS FROM THE
FLUE.
3.17 File the cut edges smooth.
Terminal
On the outside wall:
3.18 Position the flue assembly into the hole. The terminal should
be flat against the wall.
3.19 Make sure the terminal is vertical, see Diagram 5.
NOTE THE ORIENTATION OF THE TERMINAL,
see Diagram 5.
3.20 Mark the 4 fixing holes.
3.21 Remove the terminal to drill the holes.
3.22 Insert wall plugs supplied.
DO NOT FIX THE FLUE AT THIS STAGE.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Steel Manhattan Balanced Log at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Steel Manhattan Balanced Log in the language / languages: English as an attachment in your email.

The manual is 2.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info