Manual Gazco Small Steel Manhattan (page 22 of 36) (English)

813410

Zoom out

Zoom in

1/36

1. Servicing Requirements

IMPORTANT – The glass panel on this appliance should be

checked for any signs of damage on the front face of the glass

panel (scratches, scores, cracks or other surface defects). If

damage is observed, the glass panel must be replaced and the

appliance must not be used until a replacement is installed.

Under no circumstances should the appliance be used if

any damage is observed. Please isolate the appliance until

a replacement glass panel has been obtained and installed.

Replacement glass panels can be purchased from Gazco via

the retailer from which the appliance was purchased or any

other Gazco distributor.

This appliance must be serviced at least once a year by a

competent person.

All tests must be carried out in accordance with the current

GasSafe recommendations.

1.1 Before Testing:

— Conduct a gas soundness test for the property ensuring

there are no leaks before servicing.

— Check the operation of the appliance before testing.

1.2 Special checks:

— Clean the burner using a vacuum cleaner with a soft

brush attachment. Ensure all debris is removed from the

burner ports.

— Clean any lint or fluff from the pilot - pay particular

attention to the aeration holes of the pilot.

— Clean away lint or fluff from under the burner.

— Check the spark gap on the pilot is correct, see Diagram 1.

— Ensure that the glass frame/ door is secured correctly

and that all retaining screws or nuts are in place.

1.3 Correct any faults found during the initial test.

1.4 Re-commission the appliance in accordance with

Commissioning Procedures.

1.5 Advise the customer of any remedial work undertaken.

13mm

7 mm

Servicing Instructions

Servicing/Fault Finding Charts

IGNITION FUNCTIONAL CHECK 1

PILOT WILL NOT LIGHT

Ensure there is no debris around the pilot assembly,

(e.g. soot, etc.) which could short the spark, clean the area.

Operate the valve.

Is there a spark?

Consult User

Instructions and retry.

Check alignment of pilot

burner head. Change the

ignition lead. See Replacing

Parts, Section 5.

Check isolation tap and

gas meter. Retry.

Correct and retry.

Purge the gas pipes

and retry.

GO TO THE NEXT

CHART IGNITION

FUNCTIONAL CHECK 2

SYSTEM OK

There is a block in the system.

Check the inlet test point and the mag seating.

Is the gas turned on to

the appliance?

Is the gas pressure correct?

Has the system got

any air in it?

Does the pilot light?

Is the control being operated

correctly?

Will the pilot light with a

match?

No Yes

Yes

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Small Steel Manhattan in the language / languages: English as an attachment in your email.

The manual is 3.42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gazco Small Steel Manhattan Manual

Product: