813479
6
Zoom out
Zoom in
Previous page
1/52
Next page
6
SETTING TIMER MODE (IN MANUAL OPERATION)
Timer Mode will turn the appliance off after a set period of time has
elapsed.
Timer Mode can be set before or during manual operation of the
fire.
Note: If Timer mode is activated and the fire is
manually turned off, the timer will be cancelled.
Changes to the Timer will reset to the default time
on next use.
If the fire is off when the Timer mode is set then the
timer will automatically start when the fire is turned
on.
Hold the handset to unlock and press and release the MODE
button. The word MAN and the Zzz symbols flash at the top of the
display.
Press and release the SET button.
This will activate the Timer mode.
The default time period is 1 hour, unless altered in Advanced
Settings.
Pressing the SET button again will show the remaining time.
This can be altered by pressing the + or - buttons.
The timer can be set between 1 minute and 24 hours.
After adjusting the time press SET again to confirm the time setting
desired.
Once the countdown has reached zero the fire will turn off.
THERMOSTATIC MODE
The handset contains a thermostatic sensor to control the operation
of the appliance according to the temperature of the room.
There are 3 temperature options that can be set:
Day Mode - indicated by a Sun symbol on the display (default
temperature 24ºC)
Night Mode - indicated by a Moon symbol on the display (default
temperature 18ºC)
Frost Protection - indicated by a Snowflake symbol on the display
(default temperature 5ºC)
PROGRAMMING THE MODES
Holding the handset to unlock, press and hold the SET button until
a beep is heard to indicate the command has been received.
Release the SET button. PROG and a flashing thermometer
symbol will be displayed at the top of the display.
Press and release the SET button to enter Day Mode.
The current temperature setting and mode will be displayed- for
example the Sun symbol on the left shows it is in Day Mode and
the default temperature is 24ºC.
To change the temperature press + or - whilst the set temperature
is displayed to alter the setting.
Press and release the SET button to confirm and to scroll to the
Night Mode.
To change the temperature press + or - whilst the set temperature
is displayed to alter the setting.
Press and release the SET button to confirm and to scroll to Frost
Protection mode.
To change the temperature press + or - whilst the set temperature
is displayed to alter the setting.
When finished press the SET button again and the new settings will
be accepted.
The display will return to the time of day screen.
CHOOSING A MODE
When choosing a mode during operation the temperature can
be temporarily changed, however these settings will reset to
the previously set programmed settings when the fire is turned
off.
Holding the handset to unlock, press and release the MODE button
several times until a thermometer symbol flashes at the top of the
display.
Press the SET button to enter the Thermostatic mode.
Press the Set button again to see the current temperature setting
and mode - for example the a Sun symbol on the left shows it is
Day Mode and the default temperature is 24°C.
With the temperature displayed, press + or - to alter the setting.
Press the MODE button repeatedly to scroll through the settings
and to select Night mode or Frost Protection.
The handset must be left in the chosen mode for it to operate.
When finished press SET again and the new setting will be
accepted.
The display will return to the time of day screen.
If at any time the power button is operated during Thermostatic
Mode the control will cancel any thermostat operation and return
the handset to Manual Mode.
SETTING TIMER MODE (IN THERMOSTATIC OPERATION)
Timer Mode will turn the appliance off after a set period of time has
elapsed.
Timer Mode can be set before or during thermostatic operation of
the fire.
Hold the handset to unlock, press and release the MODE button
until the word MAN and the Zzz symbols are flashing at the top of
the display.
Press and release the SET button.
This will activate the Timer mode.
The default time period is 1 hour, unless altered in Advanced
Settings.
Pressing the SET button again will show the remaining Time.
This can be altered by pressing the + or - buttons.
The timer can be set between 1 minute and 24 hours.
After adjusting the time press SET again to confirm the time setting
desired.
Once the countdown has reached zero the fire will turn off.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Sheraton 5 - Balanced Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Sheraton 5 - Balanced Flue in the language / languages: English as an attachment in your email.

The manual is 8.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info