813415
22
Zoom out
Zoom in
Previous page
1/36
Next page
22
Installation Instructions
When a command from the handset is received a beep will
sound and the LED on the handset will briefly illuminate.
NOTE: The LED flashes every 4 seconds to show that it is
communicating with the appliance. After each command has
been accepted the LED will cease flashing until the
command has been carried out. Wait until the LED resumes
flashing before giving another command.
Manual Mode
Switching the Appliance ON:
7.8 To light the appliance press the On/Off () button, this will
bring up the LCD screen. Select the 'On' option on the left of
the screen immediately followed directly by the OK button, a
single beep will sound.
After the start up cycle has completed the appliance will light
on the high flame setting (this can take up to 20 seconds).
Select the 'Manual' option on the screen to control the
appliance.
Decreasing the Flame Height:
7.9 From the high flame setting press DOWN () once to lower
the flame to the medium setting.
7.10 From the medium flame setting press DOWN () once to
lower the flame to the low setting.
7.11 From the low flame setting press DOWN () once to put the
appliance in Standby mode (Pilot only).
Increasing the Flame Height:
8.12 To light the appliance when it is in Standby mode press UP
() once. The appliance will light on the Low flame setting.
7.13 From the low setting press UP () once to increase the
flame setting to medium.
7.14 From the medium setting press UP () once to increase the
flame setting to high.
IMPORTANT: YELLOW FLAMES TYPICALLY
APPEAR WHEN THE APPLIANCE HAS REACHED
NORMAL OPERATING TEMPERATURE. THIS CAN
TAKE UP TO 30 MINUTES.
WARNING: IF THE APPLIANCE FAILS TO LIGHT
OR BECOMES EXTINGUISHED IN USE, WAIT 3
MINUTES BEFORE ATTEMPTING TO RELIGHT.
Switching the Appliance OFF:
7.15 To switch the appliance OFF press the On/Off () button
once, see Diagram 23.
FOR FULL OPERATING INSTRUCTIONS AND
TROUBLESHOOTING SEE USER SECTION.
8. Touch Pad Control
The touch pad control is located at the base of the front of the
appliance, see Diagram 25.
25
With the touch pad it is possible to turn the appliance ON, OFF
and control the flame setting.
NOTE: When using the touch pad buttons a beep will be emitted
from the appliance to indicate an accepted command.
Lighting the appliance
8.1 Press the On/Off button once.
If the pilot fails to light, press the ON/OFF button to switch
OFF. Wait for at least 30 seconds before attempting to
relight.
8.2 After the start up cycle has completed the appliance will light
on the high flame setting (this can take up to 20 seconds).
If the appliance is in Standby mode, pressing the UP ()
button will cause the main burner to ignite on the Low flame
setting.
8.3 To increase the flame height press the UP () button.
8.4 To decrease the flame height press the DOWN () button.
8.5 When on the lowest flame setting pressing the Down ()
button will switch the appliance to Standby mode (pilot only).
IMPORTANT: YELLOW FLAMES TYPICALLY
APPEAR WHEN THE APPLIANCE HAS REACHED
NORMAL OPERATING TEMPERATURE. THIS CAN
TAKE UP TO 30 MINUTES.
WARNING: IF THE APPLIANCE FAILS TO LIGHT
OR BECOMES EXTINGUISHED IN USE, WAIT 3
MINUTES BEFORE ATTEMPTING TO RELIGHT.
To Switch the Appliance OFF:
8.6 To turn the appliance OFF press the On/Off button once.
Touch Pad Control Not Working
If the appliance is not operating with the touch pad control:
8.7 Replace the batteries in the wall switch unit, see Section 6,
User Instructions.
8.8 If the appliance still fails to operate consult your installer or
Gazco retailer.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Riva Vision Large MK1 Series Conventional Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Riva Vision Large MK1 Series Conventional Flue in the language / languages: English as an attachment in your email.

The manual is 3.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info