813414

Gazco Riva Vision Large MK1 Series Balanced Flue Instructions Manual

8
Zoom out
Zoom in
Previous page
1/40
Next page
8
User Instructions
2.39 The program must now be launched. To do to this see
Section 2.44.
Setting Weekly Operating Times:
2.40 Access the programming screen as detailed in Section 2.36.
The word 'Daily' will be highlighted. Select 'Change' to scroll
from 'Daily' to the required day of the week (Monday -
Sunday).
2.41 Press () to access the timer. Select the function settings for
each hour of the chosen day as detailed in 2.40.
Repeat for the rest of the week.
2.42 Once the programming is completed select Back to return to
the main screen.
2.43 The program must now be launched. To do to this see 2.44.
Launching a Daily or Weekly Program:
2.44 Select Menu. In the next screen use () to scroll to Program
and confirm. Select Change until the highlighted text reads
ON.
Note: The appliance must be ON (pilot lit or any flame setting)
in order to launch the program.
2.45 Select Back and use () to select Prog Type. Select Change
until the desired program (Daily or Weekly) is highlighted.
Select Back twice to return to the main screen.
To Switch Off Program Mode
2.46 To switch off the set program select Stop from the options
on the main screen. The appliance will switch to Stand-by
(pilot only). Alternatively select Auto; this will end the
program cycle and return to the main screen. The appliance
will automatically adjust the flame height to maintain any
previously set Fixed Temperature.
Locking the Handset
2.47 To lock the handset Select Lock. If the option is not visible
on the screen (i.e. when the appliance is lit) select Menu
and scroll down to Lock. Press Select and use the Change
function to scroll to Yes. The handset is now locked.
3. Replacing the Handset Batteries
3.1 BEFORE USE:
Ensure the remote handset contains 2 x AA 1.5v alkaline
batteries (provided). Always replace the batteries with high
quality batteries (Duracell or similar).
DO NOT USE RECHARGEABLE BATTERIES.
3.2 Communication between the handset and the appliance
may take up to 2 minutes after batteries have been
replaced, check the strength of the signal in the top right
hand corner of the LCD display ( ).
3.3 If communication is not regained after this time the control
unit and the handset may need pairing. Please refer to
Commissioning, Section 2, Pairing the Appliance.
4. Handset Troubleshooting
IMPORTANT - THE CONTROL SYSTEM HAS BEEN
PROGRAMMED TO CHANNEL 'C'. SOME
HOUSEHOLDAPPLIANCESMAYHAVEALSO
BEEN SET TO OPERATE ON THE SAME
FREQUENCY. ALTHOUGH THIS HAS NO EFFECT
ONTHESAFETYOFTHESYSTEMANEXCESSIVE
DELAY MAY BE ENCOUNTERED BETWEEN
COMMANDS. IF THIS OCCURS FOLLOW THE
INSTRUCTIONS IN COMMISSIONING SECTION 3
TO CHANGE THE CHANNEL.
CHANNEL SETTINGS
4.1 The appliance has been factory set to only communicate
with the handset it is supplied with. It will not respond to any
other remote control, even one from an identical appliance.
A replacement handset will need to be paired with the
appliance before use. Please refer to Commissioning,
Section 2, Pairing the Appliance.
LOW BATTERY
4.2 If the batteries in the remote control handset become
discharged the LCD display will show the message Low
Battery.
Follow Section 3 - Replacing The Handset Batteries.
REMOTE SIGNAL STRENGTH
NOTE: If the handset is taken out of range the signal
strength indicator will show 'Loss of Signal'. When
the handset is returned to the appliance it will be
necessary to press any button and wait for the signal
indicator to recognise the handset. This can take up
to 4 minutes
4.3 If the appliance does not respond to the handset, check the
strength of the signal in the top right hand corner of the LCD
display ( ).
No vertical bars next to the signal symbol ( ) means
communication between the appliance and the handset has
been lost. If the communication loss exceeds 18 minutes the
appliance will emit 20 beeps and switch OFF. Try the
following:
4.4 Move the handset closer to the appliance.
4.5 Replace the batteries in the handset, see Section 3.
4.6 If there is still no signal, operate the appliance using the
touch pad control, see Section 5 and consult your installer
or Gazco retailer.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Riva Vision Large MK1 Series Balanced Flue Instructions at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Riva Vision Large MK1 Series Balanced Flue Instructions in the language / languages: English as an attachment in your email.

The manual is 4.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info