813414

Gazco Riva Vision Large MK1 Series Balanced Flue Instructions Manual

6
Zoom out
Zoom in
Previous page
1/40
Next page
6
User Instructions
8) Selected Mode - Manual Flame / Fixed Temp (Auto) /
Program - when appliance is switched on
9) Day of the week (Mon - Sun)
12
3
4
5
6
7
8
9
3
1. Manual Mode
Switching the Appliance ON:
2.10 To light the appliance press the On/Off (�) button, this will
bring up the LCD screen. Select the 'On' option on the left of
the screen immediately followed directly by the OK button, a
single beep will sound.
After the start up cycle has completed the appliance will light
on the high flame setting (this can take up to 20 seconds).
Select the 'Manual' option on the screen to control the
appliance.
Decreasing the Flame Height:
2.11 From the high flame setting press DOWN () once to lower
the flame to the medium setting.
2.12 From the medium flame setting press DOWN () once to
lower the flame to the low setting.
2.13 From the low flame setting press DOWN () once to put the
appliance in Standby mode (Pilot only).
Increasing the Flame Height:
2.14 To light the appliance when it is in Standby mode press UP
() once. The appliance will light on the Low flame setting.
2.15 From the low setting press UP () once to increase the
flame setting to medium.
2.16 From the medium setting press UP () once to increase the
flame setting to high.
IMPORTANT: YELLOW FLAMES TYPICALLY
APPEAR WHEN THE APPLIANCE HAS REACHED
NORMAL OPERATING TEMPERATURE. THIS CAN
TAKE UP TO 30 MINUTES.
WARNING: IF THE APPLIANCE FAILS TO LIGHT
OR BECOMES EXTINGUISHED IN USE, WAIT 3
MINUTES BEFORE ATTEMPTING TO RELIGHT.
Switching the Appliance OFF:
2.17 To switch the appliance OFF press the On/Off (�) button
once, see Diagram 1.
2. Automatic Mode
Auto mode allows you to pre-set a room temperature. The
appliance controls the flame setting automatically to achieve and
maintain this temperature.
NOTE: WHEN IN AUTOMATIC MODE, THE PILOT REMAINS LIT
AND THE MAIN BURNER AUTOMATICALLY ADJUSTS TO
MAINTAIN THE FIXED TEMPERATURE WHETHER OR NOT
ANYONE IS IN THE ROOM.
2.18 If the appliance is switched off, select On followed by OK.
The appliance will emit a single beep and the pilot will light.
2.19 Select Auto. The screen will display the word 'Thermo' and
the current fixed room temperature will be highlighted.
2.20 Use the buttons directly below the up () or down ()
symbols to select a temperature between 0˚C and 37˚C.
The flame setting required to achieve the desired room
temperature will now be displayed below the word 'Thermo'.
2.21 The appliance will maintain the fixed temperature by
automatically adjusting the flame height as follows:
a) If the room temperature falls 1˚C below the fixed
temperature the flame height will increase.
b) If the room temperature rises 1˚C above the fixed
temperature the flame height will decrease.
c) There will be a delay of 10 seconds between each flame
setting adjustment.
2.22 Once the desired room temperature has been set, select
Back to return to the main screen.
2.23 The screen will now display the words 'Fixed Temp', the
chosen fixed temperature (e.g. 25˚C) and the current room
temperature (e.g 24˚C), see Diagram 4.
4
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Riva Vision Large MK1 Series Balanced Flue Instructions at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Riva Vision Large MK1 Series Balanced Flue Instructions in the language / languages: English as an attachment in your email.

The manual is 4.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info