813420
28
Zoom out
Zoom in
Previous page
1/36
Next page
28
Servicing Instructions - Replacing Parts
5. Black Enamelled Panels for Riva Vision
with Stone Chippings
5.1 Slide the side panels forward until clear of the appliance,
see Diagram 6.
6
Pull the bottom panel forward and out of the appliance:
5.2 When removing the back panel first remove the main
burner, see Section 7.
5.3 Slide the lower edge of the back panel forward and lift the
panel from the appliance, see Diagram 7.
7
5.4 To reassemble the panels in reverse order:
5.5 Slide the top of the back panel into place before pushing the
lower edge back.
5.6 Replace the main burner.
5.7 Replace the bottom panel.
6. Vermiculite/ Black Reeded Panels for
Riva Vision with Logs
The Riva Vision appliances have the option of two different
liner finishes:
Vermiculite
Black Reeded Panels
NOTE: RIVA VISION FRONT PANELS ARE IN 2 PIECES:
HOLD THE REAR PANEL UNTIL ALL THE OTHER
PANELS ARE IN PLACE AS THEY CAN FALL FORWARD.
6.1 Place the rear panel(s) behind the locating bracket on the
rear support bar.
6.2 Centralise the rear panel(s) with the chamfers touching and
pushed together, see Diagram 8.
8
Rear Support Bar
Rear Panel(s)
Fixing Bracket (Studio 3 only)
6.3 Place the lower side and front panels in position so the
chamfers meet at the front edge of the burner.
6.4 Ensure the two-piece front panels are engaged against the
centre support tags on the burner and are pushed together
in the middle, see Diagram 9.
9
Front and Lower Side Panels
6.5 Slide the two side panels up to the rear panel,
see Diagram 10.
10
Side Panels
NOTE: THE HORIZONTAL CHAMFERS MUST ALIGN ON
THE REAR AND SIDE PIECES.
6.6 Replace the side panels.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Riva Vision Large 50000 serie Balanced Flue Instructions at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Riva Vision Large 50000 serie Balanced Flue Instructions in the language / languages: English as an attachment in your email.

The manual is 3.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info