Manual Gazco Riva Nemos Coprecci (page 31 of 34) (English)

813402

Zoom out

Zoom in

1/34

HEADING

8. MAIN INJECTOR

8.1 Remove the burner module as described in Servicing,

Section 2. Disconnect the pipe from the injector and the

gas valve (see Diagram 19).

AR0825

8.2 Rotate the injector until it is fully removed, and install the

correct replacement injector. Re-assemble and turn the gas

supply on, check for any leaks.

9. PRIMARY AERATION PLATE

NOT ALL MODELS HAVE AERATION PLATES. REFER TO

TECHNICAL SPECIFICATIONS, PAGE 10.

9.1 Remove the burner module as described in Servicing,

Section 2.

9.2 Remove the fixing screw and slide the plate off the venturi.

9.3 Replace with the correct size plate and secure with the

screw. Ensure the lower edge of the plate is located over

the venturi flange (see Diagram 20).

AR0766

SERVICING INSTRUCTIONS

REPLACING PARTS

10. CHANGING BETWEEN GAS TYPES

In order to change between gas types, it will be necessary to

change the following items:

Burner Unit

Pilot Injector

Control Valve

Injector

Aeration Plate (if required)

Data Badge

A kit of parts is available for this, always quote the Model

number and Serial number when ordering any spare parts.

NOTE: THE CONTROL VALVE IS FACTORY PRESET FOR

THE CORRECT GAS TYPE AND MODEL, A NEW UNIT

WILL NEED TO BE ORDERED WHEN CHANGING

BETWEEN GAS TYPES.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Riva Nemos Coprecci in the language / languages: English as an attachment in your email.

The manual is 3.17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gazco Riva Nemos Coprecci Manual

Product: