813402
29
Zoom out
Zoom in
Previous page
1/34
Next page
29
5.3 Disconnect the external pilot pipe from the brass fitting (see
Diagram 13, arrow A).
AR2704
13
A
B
5.4 Remove the external inlet pipe from the brass fitting (see
Diagram 13 arrow B).
5.5 Remove the control box and gas valve by undoing the 3 x
screws securing them to the base of the appliance (see
Diagram 14).
14
AR2704
Screws
5.6 The whole bracket containing the valve control and battery
box should now be able to slide out allowing removal of the
pipes and thermocouple.
5.7 Undo the 2 x 7mm nuts securing the valve to the bracket.
5.8 Replace in reverse order.
5.9 Check all joints for gas leaks, check the operation of the
thermocouple and ignition lead.
SERVICING INSTRUCTIONS
REPLACING PARTS
6. MAGNETIC SAFETY VALVE
6.1 Remove the gas valve as described in Section 5.
6.2 Undo the magnetic valve retaining nut at the back of the
control valve. Gently tap out the mag valve and replace
with a new unit (see Diagram 15). Replace in reverse order.
15
AR2590
Retaining nut
7. CONTROL BOX
7.1 To access the control box undo the 2 x screws securing it to
the base of the appliance (see Diagram 16).
16
AR2704
Screws
7.2 Disconnect from the control box:
— Ignition lead
— Thermo current cables
— Earth connection
— 7-way stepper motor plug
— The battery power supply cable
— The touch pad control cable
Refer to Diagram 17 for details.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Riva Nemos Coprecci at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Riva Nemos Coprecci in the language / languages: English as an attachment in your email.

The manual is 3.17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info