813402

Gazco Riva Nemos Coprecci Manual

21
Zoom out
Zoom in
Previous page
1/34
Next page
21
HEADING
d) How the appliance works with the touch pad control
(Section 2B of the User Instructions).
e) How the appliance works with the remote control
handset and the modes of operation (Section 2A of the User
Instructions).
g) What to do if the appliance fails to operate (Section 13 of
the User Instructions).
2. PAIRING THE HANDSET WITH THE
APPLIANCE
Prior to re-connection of the control box to the appliance,
if there is no communication between the remote handset
and the appliance, or if the handset is replaced, it will be
necessary to pair the (new) handset with the appliance.
2.1 Remove the 2 x screws securing the control box bracket.
1
AR2704
Screws
2.2 Ensure batteries are fitted and working in the handset.
2.3 Ensure all leads and cables are connected correctly.
2.4 Press the On/Off button (�) for at least 10 seconds. The
LED will flash on and off as normal during this time. When
the LED on the control lights up for at least 1 second
release the button.
2.5 Within 5 seconds of the LED going out press the () button
followed directly by the () button.
2.6 Within 20 seconds press the yellow button on the control
box (see Diagram 2). This may be easier using a pencil, ball
point pen or similar.
YELLOW FLAMES WILL APPEAR WHEN THE FIRE HAS
GAINED SUFFICIENT HEAT - TYPICALLY 10 TO 20 MINUTES.
TOUCH PAD CONTROL NOT WORKING
If the appliance is not operating with the touch pad
control:
6.15 Replace the batteries in the battery pack following Section 4.
6.16 If the appliance still fails to operate consult your installer or
Gazco dealer.
7. TURNING THE APPLIANCE OFF
REMOTE CONTROL
7.1 To turn the appliance off press the On/Off (�) button once.
TOUCH PAD CONTROL
7.2 To turn the appliance off press the On/Off button once.
IF THE FIRE IS EXTINGUISHED OR GOES OUT IN USE,
WAIT 3 MINUTES BEFORE ATTEMPTING TO RELIGHT
IT. THE CONTROL VALVE HAS AN INTERLOCK DEVICE
AND THEREFORE CANNOT BE LIT UNTIL THE 3
MINUTES HAVE ELAPSED.
1. COMMISSIONING THE APPLIANCE
1.1 Complete the Commissioning Checklist at the front of this
manual covering:
— Flue checks
— Gas checks
— Log layout - flame picture
For working pressure test, use the access panel at the gas
connection ensuring the burner is in position. Refer to
Installation Instructions, Section 3.
1.2 Upon completion of of the commissioning and testing of the
installation and correct operation of the appliance, the
installer must instruct the user how to operate the
appliance.
1.3 Guide the user through the User Instructions paying
particular attention to:
a) Regular servicing (Section 9 of the User Instructions).
b) Ventilation (Section 10 of the User Instructions) - point
out the ventilation positions where applicable.
c) Hot surfaces (Section 12 of the User Instructions).
INSTALLATION INSTRUCTIONS
INSTALLATION/COMMISSIONING
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Riva Nemos Coprecci at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Riva Nemos Coprecci in the language / languages: English as an attachment in your email.

The manual is 3.17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info